chip and dale Archieven - Delinlea - My little fantasy world

♥ Chip and Dale Ufufy Amigurumi

18 juni 2020 by Delinlea Leave a Comment

Hey Lovelies! I hope you are doing well these days. I’m gonna keep the intro short today, since I am clueless what to write haha. I usually know what to write, and now I’m like blank. Oh well, some days are like that I guess. The pattern for today are Chip and Dale Ufufy! I finally made those cuties. I hope you will enjoy them and let’s go to the pattern.

For this Pattern you’ll need:
♥ Yarn in the colors Brown (2 colors, check Chip and Dale to see what color of Brown), Light Yellow, White and Black.
♥ Bit of Fluffy White yarn.
♥ Crochet Hook. (I used a 2mm and a bigger hook for the fluff yarn).
♥ Stitch Markers.
♥ Sewing Pins
♥ Stuffing.
♥ Yarn Needle.
♥ Felt in the colors Black/Dark Brown, White and Pink.
♥ Scissors.
♥ (Fabric) Glue.

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
SC = Single Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

Pattern Chip and Dale

This pattern is made using continuous rounds, unless stated otherwise.
Both Chip and Dale have a different color brown, so check pictures to figure out which color you need.

Body
Start with the color Brown.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 tines. [24]
From here on you will change colors to make the eyes etc.
5: Brown; 11SC, Light Yellow; 2SC, Brown; 2SC, Light Yellow; 2SC, Brown; 7SC. [24]
6: Brown; (3SC, inc) 2 times, 3SC, (Light Yellow, inc, 2SC, Brown; 1SC) 2 times, Brown; inc, 3SC, inc. [30]
7: Brown; 13SC, Light Yellow; 4SC, Brown; 1SC, Light Yellow; 4SC, Brown; 8SC. [30]
8: Repeat row7.
9: Brown; 11SC, Light Yellow; 13SC, Brown; 6SC. [30]
10: Repeat row9.
From here you will also add black to create the stripe on his back.
11: Brown; 2SC, Black; 1SC, Brown; 10SC, Light Yellow; 9SC, Brown; 8SC. [30]
12: Brown; 2SC, Black; 1SC, Brown; 10SC, Light Yellow; BL 9SC, Brown; continue normally, 8SC. [30]
13: Repeat row11.
14: Repeat row11.
15: Brown; 2SC, Black; 1SC, Brown; 9SC, inc, Light Yellow; dec, 5SC, dec, Brown; inc, 7SC. [30]
16: Brown; 2SC, Black; 1SC, Brown; 10SC, inc, Light Yellow; dec, 3SC, dec, Brown; inc, 8SC. [30]
17: Brown; 2SC, Black; 1SC, Brown, 27SC. [30]
18: (3SC, dec) 6 times. [24]
19: (2SC, dec) 6 times. [18] Stuff the body!
20: (1SC, dec) 6 times. [12]
21: (dec) 6 times. [6]
Fasten off and weave in tail.
At row12 you worked in the Back Loops only, now attach the fluffy yarn in the Front Loops, and make 9SlSt. Fasten off and weave in tail. My fluffy yarn was too long so I gave it a little trim.

Legs (Make 4)
Use the color Brown.

1: 6SC in a Magic Ring. [6]
2: 6SC. [6]
Fasten off and leave a long tail for sewing.

Snout
Use the color White.

1: 6SC in a Magic Ring. [6]
2: (1SC, inc) 3 times. [9]
Fasten off and leave a long tail for sewing.

Ears and Tail. (Make 3)
Use the color Brown for the 2 ears and White for the tail.

1: 4SC in a Magic Ring. [4]
2: (inc, 1SC) 2 times. [6]
Fasten off and leave a long tail for sewing.

Assembling

Whenever I assemble Amigurumi, I use sewing pins to pit the piece together first, so I can all parts move around easily. When I am happy, I’ll sew them on. I recommend you do so as well!

Position the snout right under the Brown stripe between his eyes and sew it on. Place the ears on top of his head, side by side, and sew them on. If you are making Dale, the tail of yarn you used to sew the ears on, weave them in to the top of his head and let them peak out, fluff them up and cut to the length you like.
For the legs, 2 go, side by side, right under his belly and the arms go on both sides of the belly.
Now go to his back, take a piece of white yarn and stitch a stripe at both sides of the black stripe. (see the pics in case you are not sure what to do) and last position his tail under the stripe and sew it on.
With felt, make some eyes, a nose, a stripe to go on his tail (if you like) and the inner ears, for dale you also make some cute little teeth. Glue those on and he’s done. (The colors for the nose for Chip and Dale are different, so make sure to put the correct color for the nose, also the eyes differ in shape.)

And Chip and Dale are created! More to add to our collection. It’s growing quite big now, but I won’t stop making them yet, way too many cute ones out there, still xD. I hope you won’t mind.

I hope you made those cuties as well and if you did, show them to me on Instagram or Twitter and use the #DelinleaDIY. Since I love to see what you make with my patterns!

Have a wonderful day and I’ll see you next week!

Love
Danielle

♥ Day 21: Chip Tsum Tsum Amigurumi

21 december 2017 by Delinlea Leave a Comment

Hey Lovelies,

I feel like I’m running behind facts. But I am trying to get my Countdown Finished! Just a few days left! I can do it! But I know I am ready for some days off. ^^
Today we will make a Chip Tsum Tsum amigurumi. I hope you’ll enjoy! ^^

Now let’s go to the pattern.

For this DIY you will need:
♥ Yarn: in the colors Light Yellow, Dark Brown, White, Green, Red, Pink and Black.
♥ Crochet hook.
♥ Stitch marker.
♥ Fiber fill.
♥ Yarn needle.
♥ Embroidery needle with black thread or black felt.
♥ Scissors.

Stitches used:
SC = Single Crochet.
DC = Double Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
Slst = Slip Stitch.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

♥ Pattern:

Body:
Start with Dark Brown

1: 6SC in magic ring. [6]
2: Change to Light Yellow, Inc 3 times, Change to Dark Brown, inc, Change to Light Yellow, inc 2 times. [12]
3: (1SC, inc), 3 times, Change to Dark Brown, 2SC, Change to Light Yellow, 1SC in the same st as the last SC, (1SC, inc), 2 times. [18]
4: (2SC, inc), 3 times, Change to Dark Brown, 2SC, Change to Light Yellow, inc, (2SC, inc), 2 times. [24]
5: (3SC, inc), 3 times, Change to Dark Brown, 2SC, Change to Light Yellow,1SC, inc, (3SC, inc), 2 times. [30]
6: (4SC, inc), 2 times, 5SC, Change to Dark Brown, 1SC in the same st as the last SC, 3SC, Change to Light Yellow,1SC, inc, (4SC, inc), 2 times. [36]
7: (5SC, inc), 2 times, 5SC, Change to Dark Brown, inc, 4SC, Change to Light Yellow, 1SC,inc, (5SC, inc), 2 times. [42]
8: 12SC, Change to Dark Brown, 21SC, Change to Light Yellow, 9SC. [42]
9: 11SC, Change to Dark Brown, 23SC, Change to Light Yellow, 8SC. [42]
10: 2SC, Change to Dark Brown, 40SC. [42]
11: SC in each st around. [42]
|
14: SC in each st around. [42]
Change to Green.
15: SC in each st around. [42]
16: Work in Back Loops only, SC in each st around. [42]
17: SC in each st around. [42]
|
29: SC in each st around. [42]
30: (5SC, dec), 6 times. [36]
31: (4SC, dec), 6 times. [30]
32: (3SC, dec), 6 times. [24]
33: (2SC, dec), 6 times. [18] Stuff the body here.
34: (1SC, dec), 6 times. [12]
35: Dec around. [6]
Fasten off and weave in tail.

At row 16 you worked in Back Loops, now join with Red in the front loops and make 42SC, Fasten off and weave in tail.

Legs: (4)
In Dark Brown

1: 4SC in magic ring. [4]
2: Inc in each st around. [8]
3: SC in each st around. [8]
|
5: SC in each st around. [8]
Fasten off and leave a long tail for sewing. You don’t have to stuff the legs.

Nose:
In White.

1: 6SC in magic ring. [6]
2: Inc in each st around. [12]
3: (1SC, inc), 6 times. [18]
4: SC in each st around. [18]
Fasten off and leave long tail for sewing. Stuff the nose lightly.

Ears: (2)
In Dark Brown.

1: 6SC in magic ring. [6]
2: inc 3 times, 3SC. [9]
3: (1SC, inc), 3 times, 3SC. [12]
4: SC in each st around. [12]
5: SC in each st around. [12]
6: (2SC, dec), 3 times. [9]
Fasten off and leave long tail for sewing. Don’t stuff the ears, just flatten them.

Inside of the ears: (2)
In Pink

1: Chain 4, insert in 2nd chain from hook, 3SC, turn. [3]
2: Chain 1, 1SC, dec, turn. [2]
3: Chain 1, dec. [1]
Fasten off and sew to the ear.

Stripe on his back.
Start with Green.

1: Chain 20, insert in 3rd chain from hook, 18DC, turn. [18]
Change to White.
2: SC in each st around. (First in 18DC st and then in 20 Chain st). [38]
Fasten off and leave long tail for sewing.

Tail:
In white.

1: 4SC in magic ring. [4]
2: (1SC, inc), 2 times. [6]
3: (1SC, inc), 3 times. [9]
4: SC in each st around. [9] Stuff lightly.
5: (1SC, dec), 3 times. [6]
Fasten off and leave long tail for sewing.
Make with black a chain of 6, insert in 2nd chain from hook and make 2 Slst, 3SC, fasten off and sew this to the tail.

♥ Assembling:

To make sure you sew all parts in the right place, you can use some sewing pins to position them. When you are happy with the position, you can sew them on.
Sew the legs on to the bottom of the body, the front legs are pointing to the front. The back legs are pointing to the side.
Sew the nose on just under the middle of the face.
Place the ears on top of his head, right beside each other and sew them on.
Place the stripe over the middle of the green part of the body, and sew it on, where the stripe ends, sew the tail on to his but.
For the eyes and nose you can either choose to use felt or you can embroider them on. I chose to embroider them on, cause yeah why choose the easy way haha. But which way you choose, Chip will look cute.

I hope you liked this pattern anyway and don’t forget to show yours with the #DelinleaDIY!

Love Danielle

♥ Day 19: Dale Tsum Tsum Amigurumi

19 december 2017 by Delinlea Leave a Comment

Hey Lovelies,

Today’s DIY is late and that has 2 reasons. I first was working so hard to get a drawing done for a contest held by Faber Castell. I send it in just minutes before the deadline.

Right after I sended my drawing, someone asked if I heard the news.. I was confused, because I didn’t checked any news for about 2 days. And then she told me Jonghyun of SHINee has left this world. I was in shock, not sure what to believe. Until I saw the official statement by SM ent. He really left this world by his own choise. He suffered from a depression and had lost the fight. Now you think why would this be a reason to update late. Well as a Kpop fan myself, and one of the first groups I loved when joining the kpop world. I couldn’t imagine that such a bright person, who was always there for others, would have suffered so much himself. As I suffered from depression myself, years ago, I know how it feels. I can’t know how he felt but I hope he found what he was looking for now, peace.
It still feels so surreal that he’s not among us anymore, and it’s affecting me more as I ever thought. Let’s just mourn and remember him as the person he was.

You did well, Kim JongHyun! You did, Rest in Peace.

Pictures for this blog will be updated tomorrow. Most of the day I wasn’t able to do stuff. I hope you understand.

Now let’s go to the pattern.

For this DIY you will need:
♥ Yarn: in the colors Light Yellow, Light Brown, White, Green, Red, Pink and Black.
♥ Crochet hook.
♥ Stitch marker.
♥ Fiber fill.
♥ Yarn needle.
♥ Embroidery needle with black and red thread or black and red felt.
♥ Scissors.

Stitches used:
SC = Single Crochet.
DC = Double Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
Slst = Slip Stitch.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

♥ Pattern:

Body:
Start with Light Brown

1: 6SC in magic ring. [6]
2: Change to Light Yellow, Inc 3 times, Change to Light Brown, inc, Change to Light Yellow, inc 2 times. [12]
3: (1SC, inc), 3 times, Change to Light Brown, 2SC, Change to Light Yellow, 1SC in the same st as the last SC, (1SC, inc), 2 times. [18]
4: (2SC, inc), 3 times, Change to Light Brown, 2SC, Change to Light Yellow, inc, (2SC, inc), 2 times. [24]
5: (3SC, inc), 3 times, Change to Light Brown, 2SC, Change to Light Yellow,1SC, inc, (3SC, inc), 2 times. [30]
6: (4SC, inc), 2 times, 5SC, Change to Light Brown, 1SC in the same st as the last SC, 3SC, Change to Light Yellow,1SC, inc, (4SC, inc), 2 times. [36]
7: (5SC, inc), 2 times, 5SC, Change to Light Brown, inc, 4SC, Change to Light Yellow, 1SC,inc, (5SC, inc), 2 times. [42]
8: 12SC, Change to Light Brown, 21SC, Change to Light Yellow, 9SC. [42]
9: 11SC, Change to Light Brown, 23SC, Change to Light Yellow, 8SC. [42]
10: 2SC, Change to Light Brown, 40SC. [42]
11: SC in each st around. [42]
|
14: SC in each st around. [42]
Change to Green.
15: SC in each st around. [42]
16: Work in Back Loops only, SC in each st around. [42]
17: SC in each st around. [42]
|
29: SC in each st around. [42]
30: (5SC, dec), 6 times. [36]
31: (4SC, dec), 6 times. [30]
32: (3SC, dec), 6 times. [24]
33: (2SC, dec), 6 times. [18] Stuff the body here.
34: (1SC, dec), 6 times. [12]
35: Dec around. [6]
Fasten off and weave in tail.

At row 16 you worked in Back Loops, now join with Green in the front loops and make 42SC, Fasten off and weave in tail.

Legs: (4)
In Light Brown

1: 4SC in magic ring. [4]
2: Inc in each st around. [8]
3: SC in each st around. [8]
|
5: SC in each st around. [8]
Fasten off and leave a long tail for sewing. You don’t have to stuff the legs.

Nose:
In White.

1: 6SC in magic ring. [6]
2: Inc in each st around. [12]
3: (1SC, inc), 6 times. [18]
4: SC in each st around. [18]
Fasten off and leave long tail for sewing. Stuff the nose lightly.

Ears: (2)
In Light Brown.

1: 6SC in magic ring. [6]
2: inc 3 times, 3SC. [9]
3: (1SC, inc), 3 times, 3SC. [12]
4: SC in each st around. [12]
5: SC in each st around. [12]
6: (2SC, dec), 3 times. [9]
Fasten off and leave long tail for sewing. Don’t stuff the ears, just flatten them.

Inside of the ears: (2)
In Pink

1: Chain 4, insert in 2nd chain from hook, 3SC, turn. [3]
2: Chain 1, 1SC, dec, turn. [2]
3: Chain 1, dec. [1]
Fasten off and sew to the ear.

Stripe on his back.
Start with Red.

1: Chain 20, insert in 3rd chain from hook, 18DC, turn. [18]
Change to White.
2: SC in each st around. (First in 18DC st and then in 20 Chain st). [38]
Fasten off and leave long tail for sewing.

Tail:
In white.

1: 4SC in magic ring. [4]
2: (1SC, inc), 2 times. [6]
3: (1SC, inc), 3 times. [9]
4: SC in each st around. [9] Stuff lightly.
5: (1SC, dec), 3 times. [6]
Fasten off and leave long tail for sewing.
Make with black a chain of 6, insert in 2nd chain from hook and make 2 Slst, 3SC, fasten off and sew this to the tail.

♥ Assembling:

To make sure you sew all parts in the right place, you can use some sewing pins to position them. When you are happy with the position, you can sew them on.
Sew the legs on to the bottom of the body, the front legs are pointing to the front. The back legs are pointing to the side.
Sew the nose on just under the middle of the face.
Place the ears on top of his head, right beside each other and sew them on.
Place the stripe over the middle of the green part of the body, and sew it on, where the stripe ends, sew the tail on to his but.
For the eyes and nose you can either choose to use felt or you can embroider them on. I chose to embroider them on, cause yeah why choose the easy way haha. But which way you choose, Dale will look cute.

I’m sorry that the pattern is late today. I hope you liked this pattern anyway and don’t forget to show yours with the #DelinleaDIY!

Love Danielle