Free Pattern

♥ Flounder Ufufy Amigurumi

1 Comment

Hey Lovelies! So, the last 2 weeks, as you probably noticed, I couldn’t make a blog post. We just moved, and the lovely people who renovated this place, cut all the internet cables. And guess what, we had to wait forever for someone to fix it. Good timing, to have no internet, in times like we live in now. Oh well, we survived 2 weeks without and we are back online. I am so tired and full of pain from the move though, so it was a challenge to upload a pattern today, a day late, I’m so glad I made it! Today I wanted to show you how to make a Flouder Ufufy, from the Little Mermaid. I hope you will love him a lot!

Flounder Ufufy made with the Amigurumi technique

For this Pattern you’ll need:
♥ Yarn in the colors Yellow, Light Blue and Darker Blue. (I used Zeeman SuperSoft).
♥ Crochet Hook. (I used a 2mm hook).
♥ Stitch Markers.
♥ Sewing Pins
♥ Stuffing.
♥ Yarn Needle.
♥ Felt in the color Black.
♥ Scissors.
♥ (Fabric) Glue.

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
SC = Single Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

Pattern Flounder

This pattern is made using continuous rounds, unless stated otherwise.

Body
Start with the color Yellow.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: 24SC. [24]
6: 24SC. [24]
From here on you will change colors to create the stripes on his back.
7: Yellow; (3SC, inc) 2 times, Blue; (3SC, inc) 2 times, Yellow; (3SC, inc) 2 times. [30]
8: Yellow; 30SC. [30]
9: Yellow; 30SC. [30]
10: Yellow; 11SC, Blue; 8SC, Yellow; 11SC. [30]
11: Yellow; 30SC. [30]
12: Yellow; 30SC. [30]
13: Yellow; 12SC, Blue; 6SC, Yellow, 12SC. [30]
14: Yellow; 30SC. [30]
15: Yellow; 30SC. [30]
16: Yellow; 13SC, Blue; 4SC, Yellow; 13SC. [30]
Continue with Yellow only.
17: 30SC. [30]
18: (3SC, dec) 6 times. [24]
19: (2SC, dec) 6 times. [18]
Stuff the body.
20: (1SC, dec) 6 times. [12]
21: Dec around. [6]
Fasten off and weave in tail.

Snout
Use the color Yellow.

1: 6SC in a Magic Ring. [6]
2: (3SC in the next st, 2SC) 2 times. [10]
3: 10SC. [10]
Fasten off and leave a long tail for sewing.

Fins/Arms and Tail (Make 3)
Start with the color Light Blue

1: Ch5, insert in the second ch from hook, inc, change to the color Dark Blue; 2SC, change back to Light Blue; 3SC in the next st, continue along the other side of the chain, change to the color Dark Blue; 2SC, change back to the color Light Blue; 1SC. [10]
2: (Light Blue; 2SC, Dark Blue, 2SC, Light Blue; 1SC) 2 times. [10]
3: (Light Blue; Dec, Dark Blue, 2SC, Light Blue; 1SC) 2 times. [8]
Fasten off and leave a long tail for sewing.

Fin/Hair
Start with the color Light Blue.
This part is not made with continues rounds.

1: Ch2, insert in second ch from hook, 1 sc, turn. [1]
2: Ch1, inc, turn. [2]
3: Ch1, 2SC, turn. [2]
Change to the color Dark Blue.
4: Ch1, 2SC, turn. [2]
Change to the color Light Blue.
5-6: Ch1, 2SC, turn. [2]
Change to the color Dark Blue.
7: Ch1, 2SC, turn. [2]
Change to the color Light Blue.
8: Ch1, 2SC, turn. [2]
9-10: Ch3, insert in second ch from hook, 2SlSt. [2]
11: Ch2, insert in second ch from hook, 1SlSt. [1]
Fasten off and leave a long tail for sewing.

Assembling

Whenever I start assembling a Amigurumi, I use sewing pins first to put everything together. This way I can move all parts around easily until I am happy with how it looks. Then I will sew it on. I recommend you do so as well.

I started with sewing on Flounder his head fin/hair, the third ‘hair’ with be on top of his head. Make sure to keep checking that the stripes of his body go on the back. Next sew on his snout, mine came around row 8 and down, from the body. Next sew on his arm fins and the tail. Last cut 2 eyes (and eyebrows) from the black felt and glue those on. With a bit of sewing thread I made the eyebrows, since I thought that was easier as the felt, but you can totally do felt as well!

Flounder is already finished, so cute right?! I hope you had fun making him. If you made him, please show me on Twitter or Instagram, I would love to see what you create with my patterns.

Have a wonderful day!

Love
Danielle

PS. if you love those Ufufy patterns, maybe you’d like to support me on Ko-Fi?! So I can keep making content like this!

// ©2021 Delinlea / Danielle Kaal // Items made with this pattern may be sold in a limited number. Credit to ‘Delinlea’ is appreciated. Not allowed for mass production or commercial purposes. You may not reproduce, translate, share, freely distribute or sell this pattern as your own in digital or printed from.

♥ Thumper Ufufy Amigurumi

Leave a Comment

Hey Lovelies! I’m a day late with uploading! Nooo~~ Haha, it’s a lot to move houses all by yourself, and keeping everything up that has to be done. And I realized that I seriously have to reduce all of my craft supplies. Let’s see what I can all make with it, I’ve plenty of ideas. Anyway, back to today’s blog, Let’s make this adorable Thumper ufufy! It’s one of those I really needed to add to our pattern collection. I hope you will love him.

Thumper Ufufy with the Amigurumi Technique

For this Pattern you’ll need:
♥ Yarn in the colors Grey, Light Yellow, White and Pink. (I used Zeeman SuperSoft).
♥ Bit of Fluffy White yarn.
♥ Crochet Hook. (I used a 2,5mm and a bigger hook for the fluff yarn).
♥ Stitch Markers.
♥ Sewing Pins
♥ Stuffing.
♥ Yarn Needle.
♥ Felt in the colors Black and Pink.
♥ Scissors.
♥ (Fabric) Glue.

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
FSC = Foundation Single Crochet.
SC = Single Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

Pattern Thumper

This pattern is made using continuous rounds, unless stated otherwise.

Body
Start with the color Grey.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
From here on you will change colors to make the eyes etc.
5: Grey; 11SC, Light Yellow; 2SC, Grey; 2SC, Light Yellow; 2SC, Grey; 7SC. [24]
6: Grey; (3SC, inc) 2 times, 3SC, (Light Yellow, inc, 2SC, Grey; 1SC) 2 times, Grey; inc, 3SC, inc. [30]
7: Grey; 13SC, Light Yellow; 4SC, Grey; 1SC, Light Yellow; 4SC, Grey; 8SC. [30]
8: Repeat row7.
9: Grey; 11SC, Light Yellow; 13SC, Grey; 6SC. [30]
10: Repeat row9.
11: Grey; 13SC, Light Yellow; 9SC, Grey; 8SC. [30]
12: Grey; 13SC, Light Yellow; BL 9SC, Grey; continue normally, 8SC. [30]
13: Repeat row11.
14: Repeat row11.
15: Grey; 12SC, inc, Light Yellow; dec, 5SC, dec, Grey; inc, 7SC. [30]
16: Grey; 13SC, inc, Light Yellow; dec, 3SC, dec, Grey; inc, 8SC. [30]
Continue with Grey only.
17: 30SC. [30]
18: (3SC, dec) 6 times. [24]
19: (2SC, dec) 6 times. [18] Stuff the body!
20: (1SC, dec) 6 times. [12]
21: (dec) 6 times. [6]
Fasten off and weave in tail.
At row12 you worked in the Back Loops only, now attach the fluffy yarn in the Front Loops, and make 9SlSt. Fasten off and weave in tail. My fluffy yarn was too long so I gave it a little trim.

Legs & Tail (Make 5)
Make 4 in the color Grey for the legs and 1 in White for the Tail.

1: 6SC in a Magic Ring. [6]
2: 6SC. [6]
Fasten off and leave a long tail for sewing.

Snout
Use the color White.

1: 6SC in a Magic Ring. [6]
2: (1SC, inc) 3 times. [9]
Fasten off and leave a long tail for sewing.

Ears (Make 2)
Use the color Grey.

1: 4SC in a Magic Ring. [4]
2: (Inc, 1SC) 2 times. [6]
3-6: 6SC. [6]
Fasten off and leave a long tail for sewing.

Inside of the Ears (Make 2)
Use the color Pink.

Make 4FSC.
Fasten off and leave a long tail for sewing.

Assembling

Whenever I start assembling a Amigurumi, I use sewing pins first to put everything together. This way I can move all parts around easily until I am happy with how it looks. Then I will sew it on. I recommend you do so as well.

Start with sewing on the legs of Thumper, around his belly. Then sew the inside of the ears to the grey base of the ears, after sew them to the top of the head. Then sew on his snout and tail. Out of some pink felt, cut a small triangle, and from black felt 2 eyes. Glue those all on.

Thumper is already finished! I hope you had fun making him. If you made him, please show me on Twitter or Instagram, I would love to see what you create with my patterns.

Have a wonderful day!

Love Danielle

PS. if you love those Ufufy patterns, maybe you’d like to support me on Ko-Fi?! So I can keep making content like this!

// ©2021 Delinlea / Danielle Kaal // Items made with this pattern may be sold in a limited number. Credit to ‘Delinlea’ is appreciated. Not allowed for mass production or commercial purposes. You may not reproduce, translate, share, freely distribute or sell this pattern as your own in digital or printed from.

♥ Day24; Candy Cane Amigurumi

Leave a Comment

Hey Lovelies! I can’t believe it’s the last day of Blogmas 2020! Did you enjoy it this year?! I hope you did. I loved designing all the items. We are not there yet, today we still have to make this cute candy cane! Although he doesn’t taste so sweet, he does look sweet, like you wanna put it in your pocket. Have fun today!

Candy Cane made with Amigurumi

For this pattern you’ll need:
♥ Yarn in the color White and Red. (I used Stylecraft Special DK)
♥ A bit of extra Black yarn to create it’s mouth.
♥ Crochet hook. (I used 3mm)
♥ Stuffing.
♥ Yarn Needle.
♥ Sewing Pins.
♥ Stitch Marker.
♥ Safety Eyes, 6mm.
♥ Wire.

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
FSC = Foundation Single Crochet.
SC = Single Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

This pattern is made with continues rounds, unless stated otherwise. Use a stitch marker to mark your first/last stitch of your row.

♥ Pattern Candy Cane

Cane
Use the color White.
While making the cane, stuff along the way. Place the eyes along the way as well, 1 between row 7&8 and the other between row 12&13.

1: 4SC in a Magic Ring. [4]
2: 2SC in each st around. [8]
3: 8SC. [8]
|
26: 8SC. [8]
Try to slide in the wire here, it probably won’t go in easily but just try to wiggle it through.
27: Dec around. [4]
Fasten off and weave in tail.

Red Stripe
Use the color Red.

Make an x amount of FSC. The reason I don’t give and amount is that you sew the first part to the cane right after you start making the stripe, along you go wrap the stripe around the cane, it can differ how many FSC you need. When you have enough to reach the other end of the cane fasten off and sew it tight. Weave in tail.

♥ Assembling

Whenever I start assembling Amigurumi, I’d like to use sewing pins to position all parts first until I’m happy. Then I will sew them on. I recommend you do so as well.

There isn’t any to assemble here. Just bent the cane in the right shape and then with the piece of black yarn, create his mouth.
If you want to hang it, don’t forget to add a loop to the top.

I hope you enjoyed today’s pattern! I think it’s adorable. If you decided to make any of the blogmas amigurumi, please show me on Twitter or Instagram  with #DelinleaDIY. I’d love to see what you make using my patterns.

And don’t forget that you can get all Blogmas patterns ad free in a PDF bundle in my Ko-Fi shop (English US terms and Dutch). The link you can find on the Blogmas Page here! (Etsy might follow later).

Have a wonderful day and Merry Christmas!

Love
Danielle

PS. if you love those Blogmas patterns, maybe you’d like to support me on Ko-Fi?! So I can keep making content like this!

// ©2020 Delinlea / Danielle Kaal // Items made with this pattern may be sold in a limited number. Credit to ‘Delinlea’ is appreciated. Not allowed for mass production or commercial purposes. You may not reproduce, translate, share, freely distribute or sell this pattern as your own in digital or printed from.

♥ Day23; Polar Bear Amigurumi

Leave a Comment

Hey Lovelies! Whenever I think of a polar bear I often have to think of the movie the golden compass! I should re-watch is again, it’s so good! Do you like to watch movies multiple times, or do you just watch them once?! I can watch good movies often, or I ‘watch’ them while making stuff. But for today we aren’t gonna watch a movie but make this adorable polar bear amigurumi! Let’s have fun!

Polar Bear made with Amigurumi

For this pattern you’ll need:
♥ Yarn in the colors White and Red. (I used Stylecraft Special DK)
♥ Bit of Black felt and (Fabric)Glue for the Nose.
♥ Crochet hook. ( I used 3mm)
♥ Stuffing.
♥ Yarn Needle.
♥ Sewing Pins.
♥ Stitch Marker.
♥ Safety Eyes, 6mm.

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
FSC = Foundation Single Crochet.
SC = Single Crochet.
BB = Bobble Stitch.
ST = Stitch.
FL = Front Loops.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

This pattern is made with continues rounds, unless stated otherwise. Use a stitch marker to mark your first/last stitch of your row.

♥ Pattern Christmas Polar Bear

Body
Use the color White.
Prepare 3 strings of White yarn of about 8cm, tie these together.

1: 6SC in a Magic Ring. [6]
Add the 3 strings of White yarn to the magic ring, the close it up.
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (5SC, inc) 3 times. [21]
5: 21SC. [21]
6: 21SC. [21]
7: 21SC. [21]
8: (5SC, dec) 3 times. [18]
9: (1SC, dec) 6 times. [12]
10: (2SC, dec) 3 times. [9]
11: FL, 9SC. [9]
12: (1SC, inc, BB) 2 times, 2SC, inc. [12]
Place the eyes now between row 6&7, about 5st apart. It will be a bit fiddly but this way you know where the legs will be, so you know where the eyes go. Also Stuff the head.
13: 12SC. [12]
14: 12SC. [12]
15: BB, 3SC, (BB, 3SC) 2 times. [12]
Stuff the body.
16: Dec around. [6]
Fasten off and weave in tail.

Snout
Use the color White.

1: 6SC in a Magic Ring. [6]
2: (inc) 2 times, 1SC, (inc) 2 times, 1SC. [10]
3: 10SC. [10]
Fasten off and leave a long tail for sewing.

Ears (Make 2)
Use the color White.

Make 4SC in a Magic Ring. [4]
Fasten off and leave a long tail for sewing.

Scarf
Use the color Red.

Make 26FSC, Fasten off and weave in tail.

♥ Assembling

Whenever I start assembling Amigurumi, I’d like to use sewing pins to position all parts first until I’m happy. Then I will sew them on. I recommend you do so as well.

Sew first his snout slightly in between his eyes, you might wanna stuff it a bit while sewing it on. Then find the position of his ears and sew those on. Cut his hair to the length you want and unraffle the strings with a needle or brush. Tie his scarf around his neck. From black felt, cut a small nose and glue this on.
If you wanna be able to hang it, make sure you add a little loop to the top.

I hope you enjoyed today’s pattern! I think it’s adorable. If you decided to make any of the blogmas amigurumi, please show me on Twitter or Instagram  with #DelinleaDIY. I’d love to see what you make using my patterns.

And don’t forget that you can get all Blogmas patterns ad free in a PDF bundle in my Ko-Fi shop (English US terms and Dutch). The link you can find on the Blogmas Page here! (Etsy might follow later).

Have a wonderful day and I’ll see you tomorrow!

Love
Danielle

PS. if you love those Blogmas patterns, maybe you’d like to support me on Ko-Fi?! So I can keep making content like this!

// ©2020 Delinlea / Danielle Kaal // Items made with this pattern may be sold in a limited number. Credit to ‘Delinlea’ is appreciated. Not allowed for mass production or commercial purposes. You may not reproduce, translate, share, freely distribute or sell this pattern as your own in digital or printed from.

♥ Day22; Christmas Wreath Amigurumi

Leave a Comment

Hey Lovelies! It’s already day 21, this went by really fast! For today we will make a Christmas wreath. I’ve made plenty over the years, but this is definitely the smallest so far. I usually use all kinds of greens and wire to put it together. The florist in me show then haha. There are so many possibilities to make them tho. This amigurumi is one of them, and would love to be part of your life.

Christmas Wreath made with Amigurumi

For this pattern you’ll need:
♥ Yarn in the colors Red and Green. (I used Stylecraft Special DK)
♥ Bit of Black yarn to make his mouth.
♥ Crochet hook. ( I used 3mm)
♥ Stuffing.
♥ Yarn Needle.
♥ Sewing Pins.
♥ Stitch Marker.
♥ Safety Eyes, 6mm.

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
FSC = Foundation Single Crochet.
SC = Single Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

This pattern is made with continues rounds, unless stated otherwise. Use a stitch marker to mark your first/last stitch of your row.

♥ Pattern Christmas Wreath

Wreath
Use the color Green.

1: 8SC in a Magic Ring. [8]
2: 8SC. [8]
Repeat row 2 until you have 27rows total.
Stuff along the way and also place the eyes along the way, 1 eye between row 11&12 and 1 between row 17&18.
Fasten off and sew the last and the first row together to make a circle.

Bow
Use the color Red.
This part isn’t made with continues rounds.

1: 20FSC, turn. [20]
2: 20SC, turn. [20]
3: 20SC. [20]
Fasten off and leave a long tail for sewing.

Middle of the Bow
Use the color Red.
This part isn’t made with continues rounds.

1: 6FSC, turn. [6]
2: 6SC. [6]
Fasten off and leave a long tail for sewing.

♥ Assembling

Whenever I start assembling Amigurumi, I’d like to use sewing pins to position all parts first until I’m happy. Then I will sew them on. I recommend you do so as well.

Make a circle of the ‘bow’ part, and sew this. Do the same with the middle part of the bow, but sew it around the ‘bow’. Then sew the bow completed to the top of the wreath. With a bit of Black yarn, create his Mouth
If you want to hang it, don’t forget to add a loop to the top.

I hope you enjoyed today’s pattern! I think it’s adorable. If you decided to make any of the blogmas amigurumi, please show me on Twitter or Instagram  with #DelinleaDIY. I’d love to see what you make using my patterns.

And don’t forget that you can get all Blogmas patterns ad free in a PDF bundle in my Ko-Fi shop (English US terms and Dutch). The link you can find on the Blogmas Page here! (Etsy might follow later).

Have a wonderful day and I’ll see you tomorrow!

Love
Danielle

PS. if you love those Blogmas patterns, maybe you’d like to support me on Ko-Fi?! So I can keep making content like this!

// ©2020 Delinlea / Danielle Kaal // Items made with this pattern may be sold in a limited number. Credit to ‘Delinlea’ is appreciated. Not allowed for mass production or commercial purposes. You may not reproduce, translate, share, freely distribute or sell this pattern as your own in digital or printed from.