kawaii Archieven - Pagina 22 van 23 - Delinlea

♥ Amigurumi Bunny Pumpkin

13 september 2018 by Delinlea Leave a Comment

Hey Lovelies! As you probably know by now, I love fall! I think it’s my favorite season of the year! (But I love winter as well.. hmm) So today another Amigurumi for fall but this will work for Halloween as well, can’t start early enough with decorations, right?! SO, Let’s go~~! Let’s make this Amigurumi Bunny Pumpkin!

For this DIY you will need:
♥ Yarn, in Orange and Light Brown or Green.
♥ Crochet hook.
♥ Stitch marker.
♥ Yarn Needle.
♥ Sewing Pins. (optional)
♥ Fiber fill.
♥ Felt in Black.
♥ Scissors.
♥ Glue.

Stitches used (US):
CH = Chain.
SC = Single Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
Slst = Slip Stitch.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

Pattern

Pumpkin
In Orange.

1: 8SC in Magic Ring. [8]
2: 2SC in each st around. [16]
3: (1SC, inc) 8 times. [24]
4: (2SC, inc) 8 times. [32]
5: (3SC, inc) 8 times. [40]
6: 40SC. [40]
|
13: 40SC. [40]
14: (3SC, dec) 8 times. [32]
15: (2SC, dec) 8 times. [24]
16: (1SC, dec) 8 times. [16]
17: dec around. [6]
Fasten off and leave a very long tail. Use this tail to go through the middle and around, and pull tight to get those parts of the typical Pumpkin look. you can do this as many times as you want, I did about 8 times.

Ears (2)
In orange.

1: 6SC in Magic Ring. [6]
2: (1SC, inc) 3 times. [9]
3: 9SC. [9]
6: 9SC. [9]
Fasten off and leave a long tail for sewing.

Stem
In Light Brown or Green.

1: 5SC in Magic Ring. [5]
2: 5SC. [5]
3: 5SC. [5]
4: inc, 4SC. [6]
Fasten off and leave a long tail for sewing.

Assembling

Sew the stem to the pumpkin, in the middle. Now position the ears with some sewing pins, place them slightly to the front, and when you are happy, sew them on.
Now cut out some eyes and a cute mouth out of felt and glue those on!

Quick and easy to make! But it’s so adorable! I can imagine a whole bunch of these as decoration for fall and Halloween! Love it! I hope you too~~ and If you made them, I would love to see yours, share them with #DelinleaDIY on Twitter or Instagram! Love you~

Love
Danielle

♥ Amigurumi Piglet Ufufy

16 augustus 2018 by Delinlea Leave a Comment

Hey Lovelies! Despite all the busy times, I really wanted to make you a new pattern! And I also needed a bit of time to relax, so I made this cute Piglet Ufufy~. Another to the collection. These are always so fast to make, a good way to just sit down and relax, even it’s a tiny bit.
I hope you will enjoy this cutie!

For this DIY you’ll need:
♥ Yarn. I used thin acrylic yarn. Light Pink, Dark Pink and Hoy Pink
♥ Crochet hook.
♥ Stitch marker.
♥ Yarn needle.
♥ Sewing pins. (optional)
♥ Embroidery Neeldle and Dark Pink thread.
♥ Scissors.
♥ Fiber Fill.
♥ Brown and Pink Felt.
♥ Key Chain. (optional)
♥ Glue (optional).

Stitches used:
CH = Chain.
SC = Single Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
Slst = Slip Stitch.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

Pattern:

Body
Start with Light Pink.

1: 6SC in magic ring. [6]
2: 2SC in each ST around. [12]
3: (1SC, inc), 6 times. [18]
4: (2SC, inc), 6 times. [24]
5: SC in each st around. [24]
6: SC in each st around. [24]
7: (3SC, inc), 6 times. [30]
8: SC in each st around. [30
|
10: SC in each st around. [30]
Change to Hot Pink.
11: SC in each st around. [30]
|
15: SC in each st around. [30]
Change back to Light Pink
16: SC in each st around. [30]
17: SC in each st around. [30]
18: (3SC, dec), 6 times. [24]
19: (2SC, dec), 6 times. [18] Stuff the body here.
20: (1SC, dec), 6 times. [12]
21: Dec all around. [6]
Fasten off and weave in tail.

Legs (4)
In Light Pink .

1: 4SC in Magic Ring. [4]
2: (1SC, inc), 2 times. [6]
Fasten off and leave long tail for sewing. You don’t have to stuff them, just flatten.

Ears (2)
In Dark Pink.

1: 4SC in Magic Ring. [4]
2: (1SC, inc), 2 times. [6]
3: (2SC, inc), 2 times. [8]
4: SC in each ST around. [8]
Fasten off and leave long tail for sewing. You don’t have to stuff them, just flatten.

Assembling

First, embroider some lines in the hot pink part of the body, use Dark Pink thread for this.
Then place the legs onto the body with sewing pins, the feet right under the Hot Pink part of the body and the arms in the middle of the Hot Pink part of the body. Sew them on.
Now place the ear on top of the head, right beside each other and sew them on as wel.
Cut some eyes and nose out of felt and glue them on. (you can also embroider the eyes and nose on, just what you want.

I hope you enjoyed this pattern! I would love to see yours if you made him! Share him with #DelinleaDIY on twitter or Instagram!

Love
Danielle

♥ 3D Origami; Pichu Diagram

9 augustus 2018 by Delinlea 2 Comments

Hey Lovelies! Today I will repost on of my free 3D Origami diagrams from my old website. You might have never seen those, or maybe you did?! But the reason for uploading them here is that I wanna delete my old website completely! I get a lot of spam on there lately and it’s annoying me a lot. So, let’s get rid of it XD.

I first will repost my Pichu diagram. I love this one! It’s just too cute.

If you have no clue what 3D Origami is, well it’s almost like paper lego, you only have to fold the same piece over and over again. Until you have enough to make something with it. the pieces slide into each other. No glue needed (Only if you have to glue on limbs xD). although some people prefer to use glue. I prefered to use a varnish at the end, when I made something. This gives it a nice shiny look, almost like plastic. And this way, the thing you made, will last longer. I have some things for about 5 years now, some are a bit discolored, but have not fallen apart.

I hope you will like this diagram! if you don’t know how to read this, just let me know or look it up on youtube. There you will also find how you can fold the base etc. It’s a fun craft to do!

Love Danielle

♥ Amigurumi Pikachu in Umbreon SleepingBag

2 augustus 2018 by Delinlea 2 Comments

Hey Lovelies! I have been watching the Crane Couple on YouTube lately.. Don’t ask me why tho, I just love all those plush they win! It gives me so much inspiration.. somehow xD. I wan’t all those plush as well haha!
Anyway I saw those Pikachu Plush in sleeping bags that were Pokémons as well! They are so adorable!! I love them. SO! Today we are going to make a Pikachu in a Umbreon sleeping bag! I hope you will love it as much as I do. I deffinitely love them and gonna make more patterns for them! Be prepared haha.

For this DIY you will need:
♥ Yarn, in Yellow, Black and Grey.
♥ Crochet hook.
♥ Stitch marker.
♥ Yarn Needle.
♥ Sewing Pins. (optional)
♥ Fiber fill.
♥ Felt of Felting wool with felting needle, in the colors Black, White, Red and Grey.
♥ Glue (optional, in case you use felt)
♥ Scissors.

Stitches used:
CH = Chain.
SC = Single Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
Slst = Slip Stitch.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

Pattern

Pikachu Head
In Yellow.

1: 6SC in Magic Ring. [6]
2: 2SC in each ST around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: (3SC, inc) 6 times. [30]
6: SC in each ST around. [30]
|
9: SC in each ST around. [30]
10: 7SC, inc, 1SC, inc, 4SC, inc, 4SC, inc, 1SC, inc, 8SC. [35]
11: 7SC, inc, 3SC, inc, 10SC, inc, 3SC, inc, 8SC. [39]
12: SC in each ST around. [39]
13: 7SC, dec, 3SC, dec, 10SC, dec, 3SC, dec, 8SC. [35]
14: SC in each ST around. [35]
15: 7SC, dec, 1SC, dec, 4SC, dec, 4SC, dec, 1SC, dec, 8SC. [30]
16: (3SC, dec) 6 times. [24]
17: (2SC, dec) 6 times. [18]
18: (1SC, dec) 6 times. [12]
19: Dec all around. [6]
Fasten off and weave in tail.

Pikachu Ears (2)
Start with Black.

1: 4SC in Magic Ring. [4]
2: (1SC, inc) 2 times. [6]
3: (1SC, inc) 3 times. [9]
4: SC in each ST around. [9]
5: (2SC, inc) 3 times. [12]
Change to Yellow.
6: SC in each ST around. [12]
|
8: SC in each ST around. [12]
9: (2SC, dec) 3 times. [9]
10: SC in each ST around. [9]
|
13: SC in each ST around. [9]
Fasten off and leave a long tail for sewing.

Sleeping Bag Umbreon
In Black.

1: 6SC in Magic Ring. [6]
2: 2SC in each ST around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: (3SC, inc) 6 times. [30]
6: (4SC, inc) 6 times. [36]
7: (5SC, inc) 6 times. [42]
8: SC in each ST around. [42]
|
20: SC in each ST around. [42]
21: (5SC, dec) 6 times. [36]
22: (4SC, dec) 6 times. [30]
21: (3SC, dec) 6 times. [24]
22: (2SC, dec) 6 times. [18]
Fasten off and weave in tail.

Hood of the Sleeping Bag
In Black.

Use the same pattern of the Sleeping Bag part, but up until row 17.
Fasten off and leave a long tail for sewing.

Sleeping Bag Umbreon Tail
Start with Black.

1: 5SC in Magic Ring. [5]
2: 2SC in each ST around. [10]
3: SC in each ST around. [10]
4: (1SC, inc) 5 times. [15]
5: SC in each ST around. [15]
6: SC in each ST around. [15]
Change to Yellow.
7: SC in each ST around. [15]
|
9: SC in each ST around. [15]
Change to Black.
10: SC in each ST around. [15]
11: (1SC, dec) 5 times. [10]
Fasten off and leave a long tail for sewing.

Sleeping Bag Umbreon Ears (2)
Start with Black.

1: 4SC in Magic Ring. [4]
2: (1SC, inc) 2 times. [6]
3: (1SC, inc) 3 times. [9]
4: SC in each ST around. [9]
5: (2SC, inc) 3 times. [12]
6: SC in each ST around. [12]
Change to Yellow.
7: SC in each ST around. [12]
|
9: SC in each ST around. [12]
Change to Black.
10SC in each ST around. [12]
11: (2SC, dec) 3 times. [9]
12: SC in each ST around. [9]
13: SC in each ST around. [9]
Fasten off and leave a long tail for sewing.

Sleeping Bag Circles (5)
In Yellow.

1: Chain 13, insert hook in the first CH, SLST to make a circle.
2: Chain 1, 13 SC
Fasten off and leave a long tail for sewing.

Assembling

First sew Pikachu’s ears to his head. Make sure you keep the head the right way, with the inc’s we created the cheeks and a sort of nose, so be aware of that.
With felting wool and the needle felt technic I made his face, but you can ofcourse use felt instead, depends on what you want. It was my first time trying needle felting on one of my amigurumi’s and I must say it’s kinda tricky.
Now sew the Hood to the Sleeping Bag. This can be a bit tricky, check my pics to see how I placed it and then sew it on. At this point, sewing pins are your best friend.
Sew Umbreon’s ears to the hood and his tail at the bottom of the sleeping bag. Now position 4 dots/circles on the base of the sleeping bag and 1 dot/circle between the ears of Umbreon. I only sew around the outside, but you can sew around the inside as well. Make with some grey yarn a ‘zipper’. I wanted to make it way to detailed at first, but that didn’t work out. Two strokes of yarn looks fine to. And I forgot the name of the thing you pull the zipper up and down with, but don’t forget to cute that out of felt and put it on.
Last but not least, sew on Pikachu’s head in the hood, best way yo do that is to pull the hood down, so you have plenty of space to work.

I hope I covered everything with the assembling but if anything is unclear, please comment down below of send me an email through the contact page, and I’ll get back to you!

Hopefully you like this one as much as I do! I wanna make more versions, and I hope you want more of them too! Don’t forget to share with #DelinleaDIY on Twitter/Instagram!

Love Danielle

♥ Elephant Amigurumi

26 juli 2018 by Delinlea Leave a Comment

Hey Lovelies!

I don’t know why, but I suddenly felt like making an elephant amigurumi haha. Even tho I struggled a lot to get the shape I wanted, I love how she turned out! I hope you will enjoy this pattern as much as I do! I definitely gonna make some more, and probably gonna make a teeny tiny one! Let’s make it hard for myself, since why not! I can imagine them in so many colors possible. So, yeah, let’s make a whole bunch of them.

For this DIY you will need:
♥ Yarn, in Pink and Yellow, but ofcourse you can use any color you like.
♥ Crochet hook.
♥ Stitch marker.
♥ Yarn Needle.
♥ Sewing Pins. (optional)
♥ Fiber fill.
♥ Safety Eyes.
♥ Scissors.

Pattern

Body
In Pink.

1: 6SC in magic ring. [6]
2: 2SC in each st around. [12]
3: SC in each st around. [12]
|
5: SC in each st around. [12]
6: (3SC, inc) 3 times. [15]
7: (4SC, inc) 3 times. [18]
8: 5SC, (1SC, inc) 4 times, 5SC. [22]*
9: (1SC, inc) 10 times. [33]
10: SC in each st around. [33]*
|
18: SC in each st around. [33]
19: (9SC, dec) 3 times. [30]
20: (3SC, dec) 6 times. [24]
21: (2SC, dec) 6 times. [18] Stuff the body here.
22: (1SC, dec) 6 times. [12]
23: Dec all around. [6]
Fasten off and weave in tail.
*When you have finished about row 12, you wanna sew around a cm together. Squeez row 8 and 10 together and sew it. this will be the mouth part, make sure it is around the place your rows start.
Add the safety eyes at this point as well, if you are using them.

Legs (4)
Start with Yellow.

1: 6SC in magic ring. [6]
2: 2SC in each st around. [12]
Change to Pink.
3: SC in each st around. [12]
4: SC in each st around.
Fasten off and leave a long tail for sewing. Stuff them lightly.

Ears (2)
In Pink.

1: 6SC in magic ring. [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: (3SC, inc) 6 times. [30]
6: SC in each st around. [30]
|
9: SC in each st around. [30]
10: (3SC, dec) 6 times. [24]
11: (2SC, dec) 6 times. [18]
12: (1SC, dec) 6 times. [12]
Fasten off and leave a long tail for sewing. Don’t stuff the ears, just flatten them.

Inside of the Ears (2)
In Yellow.

1: CH5, insert in second CH from hook, 4SC, turn. [4]
2: CH1, inc, 2SC, inc, turn. [6]
3: CH1, inc, 4SC, inc, turn. [8]
4: CH1, SC in each st, turn. [8]
5: CH1, dec, 4SC, dec, turn. [6]
6: CH1, dec, 2SC, dec. [4]
Fasten off and leave a long tail for sewing.

Assembling

First sew the inside of the ears to the outside of the ears.
Then place both ears to the sides of her head, using sewing pins. This way you can easily move them around until you are happy. When you are sew them on.
Position the legs as well, using the same method as the ears. I put them all together on her belly. And then, just sew them on one by one, it can be a bit fiddly, but I am sure you can do it!
Last but not least, add 3 pieces of yarn on a yarn needle, and get those about half way through at his butt (see picture). Make a braid with them and finish off with a knot, cut the remaining bits off and you have finished your elephant!

Isn’t she adorable!? I love to see yours, share it with #DelinleaDIY on twitter/instagram!

Love
Danielle