Amigurumi Archieven - Pagina 25 van 29 - Delinlea

♥ Amigurumi Piglet Ufufy

16 augustus 2018 by Delinlea Leave a Comment

Hey Lovelies! Despite all the busy times, I really wanted to make you a new pattern! And I also needed a bit of time to relax, so I made this cute Piglet Ufufy~. Another to the collection. These are always so fast to make, a good way to just sit down and relax, even it’s a tiny bit.
I hope you will enjoy this cutie!

For this DIY you’ll need:
♥ Yarn. I used thin acrylic yarn. Light Pink, Dark Pink and Hoy Pink
♥ Crochet hook.
♥ Stitch marker.
♥ Yarn needle.
♥ Sewing pins. (optional)
♥ Embroidery Neeldle and Dark Pink thread.
♥ Scissors.
♥ Fiber Fill.
♥ Brown and Pink Felt.
♥ Key Chain. (optional)
♥ Glue (optional).

Stitches used:
CH = Chain.
SC = Single Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
Slst = Slip Stitch.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

Pattern:

Body
Start with Light Pink.

1: 6SC in magic ring. [6]
2: 2SC in each ST around. [12]
3: (1SC, inc), 6 times. [18]
4: (2SC, inc), 6 times. [24]
5: SC in each st around. [24]
6: SC in each st around. [24]
7: (3SC, inc), 6 times. [30]
8: SC in each st around. [30
|
10: SC in each st around. [30]
Change to Hot Pink.
11: SC in each st around. [30]
|
15: SC in each st around. [30]
Change back to Light Pink
16: SC in each st around. [30]
17: SC in each st around. [30]
18: (3SC, dec), 6 times. [24]
19: (2SC, dec), 6 times. [18] Stuff the body here.
20: (1SC, dec), 6 times. [12]
21: Dec all around. [6]
Fasten off and weave in tail.

Legs (4)
In Light Pink .

1: 4SC in Magic Ring. [4]
2: (1SC, inc), 2 times. [6]
Fasten off and leave long tail for sewing. You don’t have to stuff them, just flatten.

Ears (2)
In Dark Pink.

1: 4SC in Magic Ring. [4]
2: (1SC, inc), 2 times. [6]
3: (2SC, inc), 2 times. [8]
4: SC in each ST around. [8]
Fasten off and leave long tail for sewing. You don’t have to stuff them, just flatten.

Assembling

First, embroider some lines in the hot pink part of the body, use Dark Pink thread for this.
Then place the legs onto the body with sewing pins, the feet right under the Hot Pink part of the body and the arms in the middle of the Hot Pink part of the body. Sew them on.
Now place the ear on top of the head, right beside each other and sew them on as wel.
Cut some eyes and nose out of felt and glue them on. (you can also embroider the eyes and nose on, just what you want.

I hope you enjoyed this pattern! I would love to see yours if you made him! Share him with #DelinleaDIY on twitter or Instagram!

Love
Danielle

♥ Amigurumi Pikachu in Umbreon SleepingBag

2 augustus 2018 by Delinlea 2 Comments

Hey Lovelies! I have been watching the Crane Couple on YouTube lately.. Don’t ask me why tho, I just love all those plush they win! It gives me so much inspiration.. somehow xD. I wan’t all those plush as well haha!
Anyway I saw those Pikachu Plush in sleeping bags that were Pokémons as well! They are so adorable!! I love them. SO! Today we are going to make a Pikachu in a Umbreon sleeping bag! I hope you will love it as much as I do. I deffinitely love them and gonna make more patterns for them! Be prepared haha.

For this DIY you will need:
♥ Yarn, in Yellow, Black and Grey.
♥ Crochet hook.
♥ Stitch marker.
♥ Yarn Needle.
♥ Sewing Pins. (optional)
♥ Fiber fill.
♥ Felt of Felting wool with felting needle, in the colors Black, White, Red and Grey.
♥ Glue (optional, in case you use felt)
♥ Scissors.

Stitches used:
CH = Chain.
SC = Single Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
Slst = Slip Stitch.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

Pattern

Pikachu Head
In Yellow.

1: 6SC in Magic Ring. [6]
2: 2SC in each ST around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: (3SC, inc) 6 times. [30]
6: SC in each ST around. [30]
|
9: SC in each ST around. [30]
10: 7SC, inc, 1SC, inc, 4SC, inc, 4SC, inc, 1SC, inc, 8SC. [35]
11: 7SC, inc, 3SC, inc, 10SC, inc, 3SC, inc, 8SC. [39]
12: SC in each ST around. [39]
13: 7SC, dec, 3SC, dec, 10SC, dec, 3SC, dec, 8SC. [35]
14: SC in each ST around. [35]
15: 7SC, dec, 1SC, dec, 4SC, dec, 4SC, dec, 1SC, dec, 8SC. [30]
16: (3SC, dec) 6 times. [24]
17: (2SC, dec) 6 times. [18]
18: (1SC, dec) 6 times. [12]
19: Dec all around. [6]
Fasten off and weave in tail.

Pikachu Ears (2)
Start with Black.

1: 4SC in Magic Ring. [4]
2: (1SC, inc) 2 times. [6]
3: (1SC, inc) 3 times. [9]
4: SC in each ST around. [9]
5: (2SC, inc) 3 times. [12]
Change to Yellow.
6: SC in each ST around. [12]
|
8: SC in each ST around. [12]
9: (2SC, dec) 3 times. [9]
10: SC in each ST around. [9]
|
13: SC in each ST around. [9]
Fasten off and leave a long tail for sewing.

Sleeping Bag Umbreon
In Black.

1: 6SC in Magic Ring. [6]
2: 2SC in each ST around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: (3SC, inc) 6 times. [30]
6: (4SC, inc) 6 times. [36]
7: (5SC, inc) 6 times. [42]
8: SC in each ST around. [42]
|
20: SC in each ST around. [42]
21: (5SC, dec) 6 times. [36]
22: (4SC, dec) 6 times. [30]
21: (3SC, dec) 6 times. [24]
22: (2SC, dec) 6 times. [18]
Fasten off and weave in tail.

Hood of the Sleeping Bag
In Black.

Use the same pattern of the Sleeping Bag part, but up until row 17.
Fasten off and leave a long tail for sewing.

Sleeping Bag Umbreon Tail
Start with Black.

1: 5SC in Magic Ring. [5]
2: 2SC in each ST around. [10]
3: SC in each ST around. [10]
4: (1SC, inc) 5 times. [15]
5: SC in each ST around. [15]
6: SC in each ST around. [15]
Change to Yellow.
7: SC in each ST around. [15]
|
9: SC in each ST around. [15]
Change to Black.
10: SC in each ST around. [15]
11: (1SC, dec) 5 times. [10]
Fasten off and leave a long tail for sewing.

Sleeping Bag Umbreon Ears (2)
Start with Black.

1: 4SC in Magic Ring. [4]
2: (1SC, inc) 2 times. [6]
3: (1SC, inc) 3 times. [9]
4: SC in each ST around. [9]
5: (2SC, inc) 3 times. [12]
6: SC in each ST around. [12]
Change to Yellow.
7: SC in each ST around. [12]
|
9: SC in each ST around. [12]
Change to Black.
10SC in each ST around. [12]
11: (2SC, dec) 3 times. [9]
12: SC in each ST around. [9]
13: SC in each ST around. [9]
Fasten off and leave a long tail for sewing.

Sleeping Bag Circles (5)
In Yellow.

1: Chain 13, insert hook in the first CH, SLST to make a circle.
2: Chain 1, 13 SC
Fasten off and leave a long tail for sewing.

Assembling

First sew Pikachu’s ears to his head. Make sure you keep the head the right way, with the inc’s we created the cheeks and a sort of nose, so be aware of that.
With felting wool and the needle felt technic I made his face, but you can ofcourse use felt instead, depends on what you want. It was my first time trying needle felting on one of my amigurumi’s and I must say it’s kinda tricky.
Now sew the Hood to the Sleeping Bag. This can be a bit tricky, check my pics to see how I placed it and then sew it on. At this point, sewing pins are your best friend.
Sew Umbreon’s ears to the hood and his tail at the bottom of the sleeping bag. Now position 4 dots/circles on the base of the sleeping bag and 1 dot/circle between the ears of Umbreon. I only sew around the outside, but you can sew around the inside as well. Make with some grey yarn a ‘zipper’. I wanted to make it way to detailed at first, but that didn’t work out. Two strokes of yarn looks fine to. And I forgot the name of the thing you pull the zipper up and down with, but don’t forget to cute that out of felt and put it on.
Last but not least, sew on Pikachu’s head in the hood, best way yo do that is to pull the hood down, so you have plenty of space to work.

I hope I covered everything with the assembling but if anything is unclear, please comment down below of send me an email through the contact page, and I’ll get back to you!

Hopefully you like this one as much as I do! I wanna make more versions, and I hope you want more of them too! Don’t forget to share with #DelinleaDIY on Twitter/Instagram!

Love Danielle

♥ Elephant Amigurumi

26 juli 2018 by Delinlea Leave a Comment

Hey Lovelies!

I don’t know why, but I suddenly felt like making an elephant amigurumi haha. Even tho I struggled a lot to get the shape I wanted, I love how she turned out! I hope you will enjoy this pattern as much as I do! I definitely gonna make some more, and probably gonna make a teeny tiny one! Let’s make it hard for myself, since why not! I can imagine them in so many colors possible. So, yeah, let’s make a whole bunch of them.

For this DIY you will need:
♥ Yarn, in Pink and Yellow, but ofcourse you can use any color you like.
♥ Crochet hook.
♥ Stitch marker.
♥ Yarn Needle.
♥ Sewing Pins. (optional)
♥ Fiber fill.
♥ Safety Eyes.
♥ Scissors.

Pattern

Body
In Pink.

1: 6SC in magic ring. [6]
2: 2SC in each st around. [12]
3: SC in each st around. [12]
|
5: SC in each st around. [12]
6: (3SC, inc) 3 times. [15]
7: (4SC, inc) 3 times. [18]
8: 5SC, (1SC, inc) 4 times, 5SC. [22]*
9: (1SC, inc) 10 times. [33]
10: SC in each st around. [33]*
|
18: SC in each st around. [33]
19: (9SC, dec) 3 times. [30]
20: (3SC, dec) 6 times. [24]
21: (2SC, dec) 6 times. [18] Stuff the body here.
22: (1SC, dec) 6 times. [12]
23: Dec all around. [6]
Fasten off and weave in tail.
*When you have finished about row 12, you wanna sew around a cm together. Squeez row 8 and 10 together and sew it. this will be the mouth part, make sure it is around the place your rows start.
Add the safety eyes at this point as well, if you are using them.

Legs (4)
Start with Yellow.

1: 6SC in magic ring. [6]
2: 2SC in each st around. [12]
Change to Pink.
3: SC in each st around. [12]
4: SC in each st around.
Fasten off and leave a long tail for sewing. Stuff them lightly.

Ears (2)
In Pink.

1: 6SC in magic ring. [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: (3SC, inc) 6 times. [30]
6: SC in each st around. [30]
|
9: SC in each st around. [30]
10: (3SC, dec) 6 times. [24]
11: (2SC, dec) 6 times. [18]
12: (1SC, dec) 6 times. [12]
Fasten off and leave a long tail for sewing. Don’t stuff the ears, just flatten them.

Inside of the Ears (2)
In Yellow.

1: CH5, insert in second CH from hook, 4SC, turn. [4]
2: CH1, inc, 2SC, inc, turn. [6]
3: CH1, inc, 4SC, inc, turn. [8]
4: CH1, SC in each st, turn. [8]
5: CH1, dec, 4SC, dec, turn. [6]
6: CH1, dec, 2SC, dec. [4]
Fasten off and leave a long tail for sewing.

Assembling

First sew the inside of the ears to the outside of the ears.
Then place both ears to the sides of her head, using sewing pins. This way you can easily move them around until you are happy. When you are sew them on.
Position the legs as well, using the same method as the ears. I put them all together on her belly. And then, just sew them on one by one, it can be a bit fiddly, but I am sure you can do it!
Last but not least, add 3 pieces of yarn on a yarn needle, and get those about half way through at his butt (see picture). Make a braid with them and finish off with a knot, cut the remaining bits off and you have finished your elephant!

Isn’t she adorable!? I love to see yours, share it with #DelinleaDIY on twitter/instagram!

Love
Danielle

♥ Pua Tsum Tsum Amigurumi

19 juli 2018 by Delinlea 22 Comments

Hey Lovelies!

I’m sorry that I am a little late with this weeks post, but hé! it’s up now haha! I had some pretty scary stuff going on earlier this week, not as in bad, but as in something good, don’t worry! It involved camera’s and I had to be in front of them. And if there’s one thing I hate is to be in front of a camera haha. Much more I can’t tell you right now. But I will tell what’s going on, when I am allowed to =).

Anyway, I didn’t make a tsum tsum pattern for a while and Pua of Moana was on my list for quit a while, so I made him now for you today~~! Have fun~!

For this DIY you will need:
♥ Yarn: in the colors Pink, Hot Pink, Grey and Black
♥ Crochet hook.
♥ Stitch marker.
♥ Yarn Needle.
♥ Sewing Pins. (optional)
♥ Fiber fill.
♥ Embroidery needle with black thread or black felt.
♥ Scissors.

Pattern

Body
Start with Pink.

1: 6SC in magic ring. [6]
2: Inc in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: (3SC, inc) 3 times, 4SC, change to Grey, 1SC in the same ST as the last SC, 2SC, change to Pink, 1SC, inc, 3SC, inc. [30]
6: (4SC, inc) 3 times, 3SC, change to Grey, 1SC, inc, 3SC, change to Pink, 1SC, inc, 4SC, inc. [36]
7: (5SC, inc) 3 times, 3SC, change to Grey, 2SC, inc, 3SC, change to Pink, 2SC, inc, 5SC, inc. [42]
8: 16SC, change to Grey, 2SC, change to Pink, 9SC, change to Grey, 4SC, change to Pink, 11SC. [42]
9: 16SC, change to Grey, 3SC, change to Pink, 23 SC. [42]
10: 16SC, change to Grey, 3SC, change to Pink, 23SC. [42]
11: 17SC, change to Grey, 2SC, change to Pink, 23SC. [42]
12: SC in each ST around. [42]
|
14: SC in each ST around. [42]
15: 18SC, change to Grey, 3SC, change to Pink, 21SC. [42]
16: 17SC, change to Grey, 5SC, change to Pink, 20SC. [42]
17: 16SC, change to Grey, 7SC, change to Pink, 19SC. [42]
18: 15SC, change to Grey, 9SC, change to Pink, 18SC. [42]
19: 13SC, change to Grey, 13SC, change to Pink, 16SC. [42]
20: 5SC, change to Grey, 1SC, change to Pink, 1SC, change to Grey, 2SC, change to Pink, 2SC, change to Grey, 17SC, change to Pink, 2SC, change to Grey, 2SC, change to Pink, 10SC. [42]
21: 5SC, change to Grey, 4SC, change to Pink, 2SC, change to Grey, 17SC, change to Pink, 2SC, change to Grey, 3SC, change to Pink, 9SC. [42]
22: 6SC, change to Grey, 3SC, change to Pink,32SC, change to Grey, 15SC, change to Pink, 4SC, change to Grey, 2SC, change to Pink, 9SC. [42]
23: 13SC, change to Grey, 13SC, change to Pink, 16SC. [42]
24: 13SC, change to Grey, 13SC, change to Pink, 16SC. [42]
25: 13SC, change to Grey, 13SC, change to Pink, 16SC. [42]
26: 12SC, change to Grey, 15SC, change to Pink, 5SC, change to Grey, 4SC, change to pink, 6SC. [42]
27: 13SC, change to Grey, 13SC, change to Pink, 7SC, change to Grey, 3SC, change to pink, 6SC. [42]
28: 15SC, change to Grey, 9SC, change to Pink, 10SC, change to Grey, 2SC, change to pink, 6SC. [42]
29: 16SC, change to Grey, 7SC, change to Pink, 19SC. [42]
30: 5SC, dec, 4SC, change to Grey, 1SC, dec, change to Pink, 3SC, change to Grey, 2SC, dec, 1SC, change to Pink, 4SC, dec, (5SC, dec) 2 times. [36]
31: 4SC, dec, 4SC, change to Grey, dec, 1SC, change to Pink, 3SC, change to Grey, dec, 1SC, change to Pink, 3SC, dec, (4SC, dec) 2 times. [30]
32: (3SC, dec), 6 times. [24]
33: (2SC, dec), 6 times. [18] Stuff the body here.
34: (1SC, dec), 6 times. [12]
35: Dec around. [6]
Fasten off and weave in tail.

Legs (4)
In Grey.

1: 4SC in magic ring. [4]
2: Inc in each st around. [8]
3: SC in each st around. [8]
|
5: SC in each st around. [8]
Fasten off and leave a long tail for sewing.

Snout
Start with Hot Pink, you won’t work in continues rounds.
Since some people experienced trouble with the written pattern, I made a crochet chart for the snout down below.

Chain7 (The black row in the chart)
1: Insert in 2nd chain from hook, 5SC, 3SC in the next st, 4SC, inc, slst in the first st. [14]
2: Ch1, inc, 4SC, inc 3 times, 4SC, inc 2 times, slst in the first st. [20]
Change to Pink.
3: Ch1, 20SC [20]
4: Ch1, 20SC [20]
Fasten off, leave long tail for sewing. Stuff the snout lightly.

Tail
Start with Black.

1: 4SC in Magic Ring. [4]
2: (1SC, inc) 2 times. [6]
3: 2SC in each st around. [12]
4: (1SC, dec) 4 times. [8]
5: (1SC, dec) 2 times, dec. [5]
Change to Pink.
6: SC in each ST around. [5]
|
11: SC in each ST around. [5]
Fasten off and leave a long tail for sewing.
You can brush out the black part of the tail for a fluffy look. The best wat is to use some kind of animal brush, like I showed in the picture.

Ears (2)
In Pink.

1: 6SC in Magic Ring. [6]
2: (1SC, inc) 3 times. [9]
3: (2SC, inc) 3 times. [12]
4: (3SC, inc) 3 times. [15]
5: (4SC, inc) 3 times. [18]
6: (5SC, inc) 3 times. [21]
7: (6SC, inc) 3 times. [24]
8: (7SC, inc) 3 times. [27]*
9: (8SC, inc) 3 times. [30]*
10: SC in each ST around. [30]
Fasten off and leave a long tail for sewing.

Optional:
8* in this round you have the option to add 2 grey SC. For the spot on his ears.
9* in this round you have the option to add 3 grey SC, do this in the same place where you added the grey SC in the previous round.

Inside of the Ears (2)
In Hot Pink.

1: CH12, insert in 2nd CH from hook, 11SC, turn. [11]
2: CH1, dec, 7SC, dec, turn. [9]
3: CH1, dec, 5SC, dec, turn. [7]
4: CH1, dec, 3SC, dec, turn. [5]
5: CH1, dec, 1SC, dec, turn. [3]
6: CH1, 1SC, dec, turn. [2]
7: CH1, dec. [1]
Fasten off and leave a long tail for sewing.

Assembling

With some Sewing Pins you place the snout just under the grey spot around his eye. Use my pictures as a guideline. When you are happy with the position, you can sew it on.
Flatten the ears first, and sew the inside of the ears to it. When you have done that, fold a small part of the side of the ear over to get these cute Pua ears.
Now you are able to position the legs, ears and tail in the right place. Just like the snout, use sewing pins first, so you can easily move them around until you are happy. Then you can sew them on.
It’s time to give him eyes and other features, I chose to embroider them on, but you can also use felt. Simply cut it out and glue it on. Just what works best for you.

I hope you enjoyed this Tsum Tsum pattern of Pua from Moana. I loved making him. Hmm let’s see who to make next. You can always comment down below (or message me on Instagram/Twitter) if there’s a character you want a pattern of. And don’t forget to show yours with the #DelinleaDIY

Have a lovely day everyone~

Love
Danielle

♥ Amigurumi Dilly Duck

12 juli 2018 by Delinlea Leave a Comment

Hey Lovelies!

It’s about time to make something cute again, right?! Well I was brainstorming a bit of what to make for upcoming blogs, and I saw one of my Blue Nose Friends plushies. I got it long ago and I remembered there are more around. When I looked them up on the internet, I found out that there are so many now! I only don’t know where to get them. The store I got this one, long ago, is now closed. So, what I can’t buy, I’ll make myself haha. Also a good reason to use my plush yarn!

Let’s make Dilly Duck of My Blue Nose Friends. I believe it’s No 4 of these series.

For this DIY you’ll need:
♥ Acryllic Yarn, in Light Blue and Grey.
♥ Plush Yarn in White.*
♥ Crochet hook, 2 sizes.
♥ Stitch marker.
♥ Yarn needle.
♥ Sewing pins. (optional)
♥ Scissors.
♥ Fiber Fill.
♥ Grey Felt.
♥ Safety Eyes.
♥ Glue (optional).

*Note: You can use regular yarn as well, but just make sure you have 2 sizes of yarn, White must be thick and the light blue and grey thin. This was you’ll be able to make him too without the plush yarn. (Scroll down for a picture)

Pattern:

Body
In White Plush Yarn.

1: 6SC in Magic Ring [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: (3SC, inc) 6 times. [30]
6: SC in each ST around. [30]
|
10: SC in each ST around. [30]
11: (3SC, dec) 6 times. [24]
12: SC in each ST around. [24]
13: (2SC, dec) 6 times. [18]
14: (1SC, dec) 6 times. [12]
Fasten off and leave long tail for sewing. Don’t forget to stuff the body!

Head
In White Plush Yarn.

1: 1: 6SC in Magic Ring [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: (3SC, inc) 6 times. [30]
6: (9SC, inc) 3 times. [33]
7: SC in each ST around. [33]
8: SC in east ST around. [33]
9: (9SC, dec) 3 times. [30]
10: SC in each ST around. [30]
11: (3SC, dec) 6 times. [24]
12: SC in each ST around. [24]
13: (2SC, dec) 6 times. [18]
14: SC in each ST around. [18]
15: SC in each ST around. [18]
16: (1SC, dec) 6 times. [12] Stuff the head here, and if you use Safety Eyes, place them inbetween row 10 and 11.
17: Dec all around. [6]
Fasten off and weave in tail.

Wings (2)
In White Plush Yarn.

1: 6SC in Magic Ring. [6]
2: 2SC in each ST around. [12]
3: SC in each ST around. [12]
|
7: SC in each ST around. [12]
Fasten off and leave a long tail for sewing. You don’t have to stuff the wings.

Beak
In Light Blue.

1: 4SC in Magic Ring. [4]
2: 2SC in each ST around. [8]
3: (1SC, inc) 2 times. [12]
4: SC in each ST around. [12]
5: (5SC, inc) 2 times. [14]
6: (6SC, inc) 2 times. [16]
7: SC in each ST around. [16]
8: SC in each ST around. [16]
Fasten off, leave an extra long tail for sewing. Now flatten the beak and sew around the edge, about 0,5CM of the edge, this way you make a rim in the beak. When you have done that, stuff the remaining middle part.

Feet (2)
In Grey.

1: 6SC in Magic Ring. [6]
2: 2SC in each ST around. [12]
3: (inc) 2 times, 4SC, (inc) 2 times, 4SC. [16]
4: (inc) 4 times, 4SC, (inc) 4 times, 4SC. [24]
5: SC in each ST around. [24]
6: (3SC, dec, 7SC) 2 times. [22]
7: (2SC, dec, 7SC) 2 times. [20]
8: (2SC, dec, 6SC) 2 times. [18]
9: SC in each ST around. [18]
Fasten off and leave long tail for sewing. Stuff lightly.
Cut of some extra grey yarn and tie a knot on one side. With a yarn needle your gonna devide the foot in 3 toes. Skip the last 3 rows, and insert the needle from the inside, wrap the yarn around the foot (make sure it’s 1/3 and 2/3), and go in the foot and out at the place you started, pull tight and fasten it off. Do this on the other side, of the foot, again. Repeat for the other foot.

Assembling.

Sew the head to the body. With some sewing pins you can place the wings in the right place, just were you’ve sewn the head to the body. When you are happy, sew those one as well.
Do the same for the feet, and sew them on tightly.
Sew the beak on as well, just under the eyes. Make some markings with black yarn on top of his beak.
Now cut 3 Squares from grey felt. You can make them as big as you want, but don’t over do. Now, with some black yarn, sew one on his head, one on the side of his belly and one on his back.
And you are done! Yay!

I hope you enjoyed this pattern! I certainly did, I love how he looks! If you made one or more too, show me with #DelinleaDIY I love to see how yours turned out! Now, enjoy the rest of your day!

Love
Danielle