Tsum Tsum

♥ Toy Story Alien TsumTsum Amigurumi

4 Comments

Hey Lovelies! I’m finally here with a new pattern! Life didn’t go as planned, all of a sudden we are gonna move, and pretty quick as well, within this month. I will try my best to keep uploading, but if I can’t you know why. I was asked if I could make a pattern for the Toy Story Alien Tsum Tsum, and of course I can help with that! I hope you will like him!

Toy Story Alien TsumTsum made with the Amigurumi Technique

For this Pattern you’ll need:
♥ Yarn in the colors;  Green, Light Blue, Dark Blue and Purple. (I used Zeeman Supersoft)
♥ Crochet Hook (I used a 2,5mm hook).
♥ Stuffing.
♥ Scissors.
♥ Sewing Pins.
♥ Yarn Needle.
♥ Felt for the facial details.
♥ (Fabric) Glue.

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
SC = Single Crochet.
FSC = Foundation Single Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

Pattern Toy Story Alien TsumTsum

This pattern is made using continues rounds, unless stated otherwise. Use a stitch marker to mark the first stitch.

Body
Start with the color Green.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: (3SC, inc) 6 times. [30]
6: (4SC, inc) 6 times. [36]
7: (5SC, inc) 6 times. [42]
8-4: 42SC. [42]
Change to the color Light Blue.
15-29: 42SC. [42]
30: (5SC, dec) 6 times. [36]
31: (4SC, dec) 6 times. [30]
32: (3SC, dec) 6 times. [24]
Stuff the body.
33: (2SC, dec) 6 times. [18]
34: (1SC, dec) 6 times. [12]
35: dec around. [6]
Fasten off and weave in tail.

Legs (Make 4)
2 in the color Green, 2 in the color Dark Blue.

1: 4SC in a Magic Ring. [4]
2: 2SC in each st around. [8]
3-5: 8SC. [8]
Fasten off and leave a long tail for sewing.

Collar & Belt.
Collar in the color Purple, Belt in the color Dark Blue.

42FSC, SlSt in the first st.
Sew it close neatly and leave a long tail for sewing it to the body.

Eyes (Make 3)
Use the color White.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
Fasten off and leave a long tail for sewing.

Ears (Make 2)
Use the color Green.

1: 4SC in a Magic Ring. [4]
2: (inc, 1SC) 2 times. [6]
3: (1SC, inc) 3 times. [9]
4-7: 9SC. [9]
8: (1SC, dec) 3 times. [6]
Fasten off and leave a long tail for sewing.

Antenna
Use the color Green.

1: 4SC in a Magic Ring. [4]
2: 2SC in each st around. [8]
3-4: 8SC. [8]
5: Dec around. [4]
6-8: 4SC. [4]
Fasten off and leave a long tail for sewing.

Assembling

Whenever I start assembling a Amigurumi, I use sewing pins first to put everything together. This way I can move all parts around easily until I am happy with how it looks. Then I will sew it on. I recommend you do so as well.

Sew the purple collar on where the Green of the body goes over into Light Blue. Then sew on his legs, the Greens go just after the collar, and the Dark Blue legs go at the end of the body. After, sew on the belt as well, just in front of the back legs.
Now position the first eye a bit off center, higher, of the face. When you got that one right, you will know where the other eyes will go as well.
Then on top of his head goes the Antenna, and to the sides the ears. Last cut some pupils out of Black felt and glue those to the eyes.

Your Toy Story Alien is done! I hope you had fun making this buddy! Let’s see who to make next! If you have any suggestions let me know down below or message me on Twitter or Instagram! And don’t forget to show your Tsum Tsum to me there as well, I’d love to see what you make using my patterns!

Have a wonderful day!

Love Danielle

PS. if you love those Tsum Tsum patterns, maybe you’d like to support me on Ko-Fi?! So I can keep making content like this!

// ©2021 Delinlea / Danielle Kaal // Items made with this pattern may be sold in a limited number. Credit to ‘Delinlea’ is appreciated. Not allowed for mass production or commercial purposes. You may not reproduce, translate, share, freely distribute or sell this pattern as your own in digital or printed from.

♥ Mushu Tsum Tsum Amigurumi

Leave a Comment

Hey Lovelies! When I was making this Tsum Tsum, I realized that this is the last Tsum pattern of the year! A bit weird to realize the year is almost done, I so hope 2021 wil be a better year!
But don’t worry, Tsum Tsum patterns will be back next year! I am already trying to think of what to make etc. Let’s be a bit better prepared this time around. Today we will make Mushu, from Mulan! I somehow struggled a lot with this one, while, in fact, it isn’t too hard. Not sure what was wrong with me. I hope you will have a better time making this pattern.

Mushu Tsum Tsum made of yarn. (Crochet)

For this pattern you’ll need:
♥ Yarn in the colors Red, Dark Red, Yellow, Black, White and Blue. (I used Zeeman Supersoft)
♥ Crochet hook. ( I used a 2mm)
♥ Stuffing.
♥ Yarn Needle.
♥ Sewing Pins.
♥ Stitch Marker.
♥ Black Felt and (Fabric)Glue.
♥ Scissors.
♥ Pink Acrylic Paint + Brush. (optional)

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
SC = Single Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

This pattern is made with continues rounds, unless stated otherwise. Use a stitch marker to mark your first/last stitch of your row.

♥ Pattern Mushu

Body
Start with the color Red

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: (3SC, inc) 6 times. [30]
6: (4SC, inc) 6 times. [36]
7: (5SC, inc) 6 times. [42]
8: 42SC. [42]
|
29: 42SC. [42]
30: (5SC, dec) 6 times. [36]
31: (4SC, dec) 6 times. [30]
32: (3SC, dec) 6 times. [24]
33: (2SC, dec) 6 times. [18] Stuff the body.
34: (1SC, dec) 6 times. [12]
35: Dec all around. [6]
Fasten off and weave in tail.

Belly
Use the color Yellow.

1: 1: CH13, insert in the second ch from hook, 11SC, 3SC in the next st, continue along the other side of the chain, 10SC, inc. [26]
2: inc, 10SC, (inc) 3 times, 10SC, (inc) 2 times. [32]
3: 1SC, inc, 10SC, (1SC, inc) 3 times, 10SC, (1SC, inc) 2 times. [38]
4: 2SC, inc, 10SC, inc, (3SC, inc) 2 times, 10SC, inc, 3SC, inc, 1SC. [44]
5: 3SC, inc, 10SC, inc, 3SC, inc, 2SC, inc, 3SC, inc, 10SC, inc, 3SC, inc, 2SC, inc. [52]
6: 52SC. [52]
Fasten off and leave a long tail for sewing.

Tail
Use the color Red.

1: 6SC in a Magic Ring. [6]
2: (2SC, inc) 2 times. [8]
3: 8SC. [8]
4: (3SC, inc) 2 times. [10]
5: 10SC. [10]
6: (4SC, inc) 2 times. [12]
7: 12SC. [12]
8: (5SC, inc) 2 times. [14]
9: 14SC. [14]
10: (6SC, inc) 2 times. [16]
11: 16SC. [16]
12: (7SC, inc) 2 times. [18]
13: 18SC. [18]
14: (5SC, inc) 3 times. [21]
Fasten off and leave a long tail for sewing.

Tip of the Tail.
Use the color Dark red.

1: 4SC in a Magic Ring. [4]
2: (inc, 1SC) 2 times. [6]
3: 6SC. [6]
4: (1SC, inc) 3 times. [9]
5: (2SC, inc) 3 times. [12]
6: 12SC. [12]
7: 12SC. [12]
8: (2SC, dec) 3 times. [9]
Fasten off and leave a long tail for sewing.

Extra for Tip of the Tail (Make 2)
Use the color Dark Red.

5SC in a Magic Ring, SlSt in the first st. [5]
Fasten off and leave a long tail for sewing.

Nose
Use the color Dark Red.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: (3SC in the next st, 3SC) 3 times. [18]
4: 1SC, (3SC in the next st, 5SC) 2 times, 3SC in the next st, 4SC. [24]
5: (2Dec, 4SC) 3 times. [18]
Fasten off and leave a long tail for sewing.

Eyes (Make 2)
Use the color White.

1: 5SC in a Magic Ring. [5]
2: 2inc, 2HDC in the next st, 2inc. [10]
Fasten off and leave a long tail for sewing.

Whiskers (Make 2)
Use the color Yellow.

Ch8, Fasten off and leave a long tail for sewing.

Ears (Make 2)
Start with the color Black.
One ear has a little gap, row 6 and 7 are worked differently, after you’ll continue as normal.

1: 6SC in a Magic Ring. [6]
2: (1SC, inc) 3 times. [9]
3: 9SC. [9]
Change to the color Red.
4: (2SC, inc) 3 times. [12]
5: 12SC. [12]
6: (3SC, inc) 3 times. [15] (for the other ear: 3SC, inc, skip3 st, inc, 3SC, inc. [12])
7: 15SC. [15] (For the other ear: 5SC, Ch3, 7SC. [15])
8: (4SC, inc) 3 times. [18]
9: 18SC. [18]
10: 18SC. [18]
11: 18SC. [18]
12: 18SC. [18]
13: (4SC, dec) 3 times. [15]
14: 15SC. [15]
15: (3SC, dec) 3 times. [12]
Fasten off and leave a long tail for sewing.
I have painted the inside of the ears pink with Acrylic paint. You could skip this or add pink felt to it.

Horns (Make 2)
Start with the color black.

1: 4SC in a Magic Ring. [4]
2: 4SC. [4]
Change to the color Blue.
3: 2SC, Ch3, 2SC. [7]
4: 7SC. [7]
5: 7SC. [7]
6: 7SC. [7]
Fasten off and leave a long tail for sewing.

Spikes Small (Make 4)
Use the color Dark Red.

1: 4SC in a Magic Ring. [4]
2: Inc, 1SC, 2HDC in the next st, 1SC. [6]
Fasten off and leave a long tail for sewing.

Spikes Medium (Make 2)
Use the color Dark Red.

Row 1 and 2 same as the Small Spikes.
3: 3SC, (2HDC in the next st) 2 times, 1SC. [8]
Fasten off and leave a long tail for sewing.

Spikes Large (Make 1)
Use the color Dark Red.

Row 1,2 and 3 same as the Medium Spikes.
4: 3SC, 1HDC, (2HDC in the next st) 2 times, 1HDC, 1SC. [10]
Fasten off and leave a long tail for sewing.

♥ Assembling

Whenever I start assembling Amigurumi, I always use sewing pins first. This way I can move parts around until I am happy with how it looks, then I’ll sew them on.

Start with sewing on Mushu’s belly to the body, sew all along the edge. Then you can add the tail as well, don’t forget to add the tip of the tail and the extra pointy bits for the tail. Next sew on Mushu’s legs.
After that it’s time to assemble his face. Start with his nose, I placed it just under where you started the body. Then you also know where the whiskers and eyes go. Sew these all on neatly. When you almost sewn on the nose, add a bit of stuffing in there.
Then position the horns, on top of his head, make sure you sew them on the right way. Under the horns, come the ears. Fold those in half and sew it on. Under that 2 small spikes will go on each side.
Last sew on the spikes on his back, 1 Medium, 1 Large and then 1 Medium nicely in the middle.
Don’t forget to make pupils for the eyes, I used a bit of black felt and glued it on. There are also some details in the nose, use a bit of black yarn and embroider those on.

And Mushu is done! I hope you had fun making this pattern! This one was requested by one of my followers. So, if you have request for future patterns as well, just let me know and I’ll see what I can do for you! Just contact me on Twitter or Instagram or leave a comment/contact form. If you made any of my patterns I would love to see, please show me on  Socials as well with #DelinleaDIY.

Have a wonderful day and I’ll see you next week!

Love
Danielle

♥ Halloween Turning TsumTsum Amigurumi

Leave a Comment

Hey Lovelies! Happy Halloween!! I hope you don’t mind that I am late with this week’s blog! I think this fun pattern will make up for it. Until the last possible moment, I wasn’t sure if this was going to work out. So, I could have ended up with no blog at all this week. But, As you can see, the blog is here, so it worked out, sorta! It’s 2 Tsum Tsum’s in one! You can turn this one inside out, so you have a normal Donald Tsum and a Halloween version. So are you ready for a turning Tsum Tsum?!

Donald Duck Tsum Tsum Amigurumi that can change in the regular version and a Halloween version

For this pattern you’ll need:
♥ DK yarn, in the colors; White, Orange, Black, Blue and Green. (I used Stylecraft Special)
♥ Crochet hook. (I used a 3mm hook)
♥ Thinner Red yarn with a 2mm Hook.
♥ Brown Sewing Thread and Needle.
♥ Yarn Needle.
♥ Stitch Marker.
♥ Brown and Black Felt for the eyes.
♥ (Fabric) Glue.

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
FSC = Foundation Single Crochet.
SC = Single Crochet.
HDC = Half Double Crochet.
DC = Double Crochet.
ST = Stitch.
FL = Front Loops.
BL = Back Loops.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

You can flip it inside out, the side you don’t wanna see is inside the body of the other.

♥ Pattern Turning Tsum Tsum

This pattern is made using continues round, unless stated otherwise. Use a stitch marker to mark you first/last stitch.

Body (Make 2)
Make 1 in Orange and 1 in White.

1: Ch7, insert in second ch from hook, 5SC, 3SC in the last st, now continue along the other side of the chain, 4SC, inc. [14]
2: Inc, 4SC, (inc) 3 times, 4SC, (inc) 2 times. [20]
3: 1SC, inc, 4SC, (1SC, inc) 3 times, 4SC, (1SC, inc) 2 times. [26]
4: 1SC, inc, 6SC, (inc, 2SC) 2 times, inc, 6SC, inc, 2SC, inc, 1SC. [32]
5-8: 32SC. [32]
9: 1SC, dec, 6SC, (dec, 2SC) 2 times, dec, 6SC, dec, 2SC, dec, 1SC. [26]
10: 1SC, dec, 4SC, (1SC, dec) 3 times, 4SC, (1SC, dec) 2 times. [20]
Fasten off and leave a long tail on one of the bodies. For the other you’ll weave in the tail.

Legs (make 8 total)
Make 6 in Orange and 2 in White.

1: 4SC in a Magic Ring. [4]
2: 4SC. [4]

Beak (Make 2)
Use the color Orange.

1: 7SC in a Magic Ring. [7]
2: 7SC. [7]
Fasten off and leave a long tail for sewing.

Bow (Make 2)
Use the color Red.

In a Magic Ring; (1SC, 1HDC, 2DC, 1HDC, 1SC) 2 times. [12]
Fasten off and wrap the tail a few times around the bow tightly, where the SC’s are. If you like how it looks, fasten off and leave the rest of the tail there for sewing.

♥ Donald Parts

Shirt
Use the color Blue
This part won’t be working in continues rounds.

1: 20FSC, turn. [20] (You can also Ch21, insert in second ch from hook, 20SC)
2-5: 20SC, turn. [20]
Fasten off and leave a long tail for sewing.

 Hat
Start with the color Blue.

1: 5SC in a Magic Ring. [5]
2: 2SC in each st around. [10]
3: BL, 10SC. [10]
Change to the color Black.
4: Fl, Dec around. [5]
Fasten off and leave a long tail for sewing.

♥ Pumpkin Parts

Hat
Start with the color Black.

1: 5SC in a Magic Ring. [5]
2: 2SC in each st around. [10]
3: BL, 10SC. [10]
4: (Dec, 3SC) 2 times. [8]
Change to the color Blue.
5: 8SC. [8]
Change back to Black.
6: FL, 2SC in each st around. [16]
Fasten off and leave a long tail for sewing.

Stem
Use the color Green.
You won’t work this part in continues rounds.

Ch3, insert in second ch from hook, 1SlSt, 1SC. [2]
Fasten off and leave a long tail for sewing.

♥ Assembling Truning Tsum Tsum

Usually I use sewing pins to put amigurumi together first, but since you don’t use any stuffing for this one, that’s gonna be a bit tricky, you could try if you want to.

On both the Orange and White body, sew the beak on. On the White body, sew his shirt one, make sure to sew along all the edges, so it’s secure enough to flip it inside out. Then sew on his legs, 2 Orange at the back and the White in front. Under his Beak you will add his little bow. And last add his little hat, when you have sewn it on, make sure you use the tail end to make the small detail on top (lacking English here, help! Haha)
Now, back to the pumpkin version, since the beak is on, you can add all the lines on the body. It’s a bit hard to explain where they should go. But on the head there are 4 lines and on the body as well. Keep in mind that it should be a pumpkin, the lines on the head go from bottom to top, where they meet, and the lines on the body go from the head to the butt and meet there. Use the sewing thread and needle to do this. Or paint/draw them on if you feel that’s better/easier. When that’s done, sew the stem, hat, 4 legs and bow to the body.
Now let’s make some eyes, for the Pumpkin use brown felt, and make the eyes slightly bigger and oval, as you would normally do for Donald. And for the normal Donald, use black felt and cut out small circles. Glue those on and let dry well.

Now for the last part of assembling, put them together, the opening should be completely lined up and sew those together. I used only the back loops to do so. Now you can push one side inside the other. And if you feel like you want to other side, flip it. The first few times, this won’t go too smoothly, but after a few times, this goes easier.

I hope you had fun with this turning Tsum pattern and hope you will make it! If you did, please, show me on Twitter or Instagram with #DelinleaDIY, I’d love to see!

Happy Halloween!! and I’ll see you next week!

Love
Danielle

♥ Buzz Lightyear TsumTsum Amigurumi

Leave a Comment

Hey Lovelies! I’m a bit late with today’s post. Well simply because I got distracted by Thai Drama’s xD. Do you like to watch drama’s? And which do you like? Anyway, I tried to crochet while trying to read the subtitles as well, that went very~~ slow xD.
As you might know today it’s time for a Tsum Tsum, I hope you are ready and a lover of Toy Story! It’s Buzz Lightyear!! Let’s go to the pattern.

Buzz Lightyear Tsum Tsum

For this Pattern you’ll need;
♥ Yarn in the colors Beige, Purple, Green, White, Black and Red. (I used Stylecraft Special DK)
♥ Crochet hook. ( I used a 3mm)
♥ Stuffing.
♥ Black, and Brown Felt for facial details.
♥ Yarn Needle.
♥ Sewing Pins.
♥ Stitch Marker.
♥ (Fabric) Glue.

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
FSC = Foundation Single Crochet.
SC = Single Crochet.
ST = Stitch.
BL = Back Loops.
FL = Front Loops.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

Buzz Lightyear Tsum Tsum

♥ Pattern Buzz Lightyear Tsum Tsum.

This pattern is made with continues rounds, unless stated otherwise. Use a stitch marker to mark your first/last stitch of your row.

Body
Start with the color Beige.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: (3SC, inc) 6 times. [30]
6: (4SC, inc) 6 times. [36]
7: (5SC, inc) 6 times. [42]
8: 42SC. [42]
|
13: 42SC. [42]
Change to the color White.
14: BL 42SC. [42] Mark the first FL of this row!
15: 42SC. [42]
|
23: 42SC. [42]
Change to the color Black.
24: 42SC. [42]
25: 42SC. [42]
Change to the color White.
26: 42SC. [42]
27: 42SC. [42]
Change to the color Green.
28: 42SC. [42]
Change to the color White.
29: 42SC. [42]
30: (5SC, dec) 6 times. [36]
31: (4SC, dec) 6 times. [30]
32: (3SC, dec) 6 times. [24]
33: (2SC, dec) 6 times. [18] Stuff the body.
34: (1SC, dec) 6 times. [12]
35: Dec around. [6]
Fasten off and weave in tail.

Purple Head Cover
At row 14 of the body you worked in BL, now rejoin your purple yarn in the front loops, in the stitch you marked. I kept the butt towards me and worked on it that way.

1: 42SC. [42]
2: 42SC. [42]
Break the yarn and fasten off. Now, skip 9st from where you stopped and rejoin your yarn.
3: 30SC, turn. [30] The remaining stitches you leave untouched.
4: Dec, 5HDC, 1SC, SlSt, 1SC and mark this st with a stitch marker, 9SC, 1SC and mark this st with a stitch marker as well, SlSt, 1SC, 5HDC, Dec.
Break the yarn and fasten off. Now, go to the stitches your marked in the previous row. Join your yarn in either one of them.
5: Dec, 9SC, dec, turn. [11]
6: Dec SC, 7HDC, dec SC. [9]
Fasten off and weave in tail and other tails that might be there.

Ear Covers (Make 2)
Use the color Purple.

5SC in a Magic Ring, SlSt in the first st.
Fasten off and leave a long tail for sewing

Green Band around his Body
Use the color Green.

1: 43FSC, make round with a SlSt in the first st. [43] (you could also Ch44, insert in second ch from hook, 43SC).
2: Ch1, 43SC, SlSt in the first st. [43]
|
4: Ch1, 43SC, SlSt in the first st. [43]
Fasten off and leave a long tail for sewing.

Legs (Make 4)
Make 2 in the color White, and 2 in the color Purple.

1: 4SC in a Magic Ring. [4]
2: 2SC in each st around. [8]
3: 8SC. [8]
|
5: 8SC. [8]
Fasten off and leave a long tail for sewing.

Middle of the Wings
Use the color White.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: BL 12SC. [12]
Fasten off and leave a long tail for sewing.

Wings (Make 2)
Start with the color Purple.
This part won’t be worked in continues rounds.

1: Ch7, insert in second ch from hook, 6SC, turn. [6]
2: Ch1, 6SC, turn [6]
The next row you will alternate white and red yarn for every SC.
3: Ch1, 6SC. [6]
Fasten off and weave in tails.

Tip of the Wings (Make 2)
Use the color Green.

1: 6SC in a Magic Ring. [6]
2: (1SC, inc) 3 times. [9]
3: 9SC. [9]
Fasten off and leave a long tail for sewing.

♥ Assembling

Whenever I assemble Amigurumi’s, I always use sewing pins first. This way you can move parts around until you are happy, then sew it on.

First, put the green band around his body, right after the purple part, sew this on. The add his legs, White in front, Purple at the back.
The ear cover go on both sides of his face, on the purple part. I always like to use references to check where everything goes.
Last, let’s assemble his wings. The Green tips of the wings, slide those over the wing part and sew those on, keep in mind that the white and red part for both are facing forward when the green tips are on the outsides. So those will be mirrored when assembled. Then sew the middle part of the wings to the body, it will be partly on green and partly on white. Now the tip/wing combination you will sew to the middle part.
Make his face, I use yarn for his nose, and felt for the eyes, eyebrows and Chin.

That was it for today, some parts might feel a bit confusing, but if you have no clue how to do it, let me know and I’ll try to help you out! If you made Buzz Lightyear, show me on Twitter or Instagram with #DelinleaDIY I’d love to see what you created!

Have a wonderful day and I’ll see you next week!

Love
Danielle

♥ Tinkerbell Tsum Tsum Amigurumi

Leave a Comment

Hey Lovelies! How’s your week going?! I still have to get back in my productive mode. Still, procrastinating a lot, oops. That’s why my blog is also late today. But here it is, finally. I made a Tinkerbell Tsum Tsum this time. I struggled a lot with making her hair, so annoying, not sure what was going on. Usually I make patterns easily. Oh well, enough babbling, let’s go to the pattern.

Tinkerbell Tsum Tsum

For this Pattern you’ll need:
♥ DK Yarn in Beige, Light Green, White and Yellow. (I used Budgetyarn.com, not sponsored)
♥ Bit of Blue yarn.
♥ Black felt for details.
♥ Crochet Hook. (I used a 2,5mm hook)
♥ Stuffing.
♥ Stitch Markers.
♥ Yarn Needle.
♥ Sewing Pins.
♥ (Fabric)Glue.

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
SC = Single Crochet.
HDC = Half Double Crochet.
DC = Double Crochet.
TR = Treble.
Picot = Chain 3 and slst in the first st.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

Tinkerbell Tsum Tsum

♥ Pattern Tinkerbell

This pattern is made with continues rounds, unless stated otherwise. Use a stitch marker to mark your first/last stitch of your row.

Body
Start with the color Beige.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: (3SC, inc) 6 times. [30]
6: (4SC, inc) 6 times. [36]
7: (5SC, inc) 6 times. [42]
8: 42SC. [42]
|
14: 42SC. [42]
Change to the color Light Green.
15: 42SC. [42]
16: BL, 42SC. [42]
17: 42SC. [42]
|
25: 42SC. [42]
Change to the color White.
26: BL, 42SC. [42]
27: 42SC. [42]
|
29: 42SC. [42]
30: (5SC, dec) 6 times. [36]
31: (4SC, dec) 6 times. [30]
32: (3SC, dec) 6 times. [24]
33: (2SC, dec) 6 times. [18] Stuff the body.
34: (1SC, dec) 6 times. [12]
35: dec all around. [6]
Fasten off and weave in tail.
At row 16 of the body you worked in back loops only. Now rejoin your yarn in the front loops, and crochet 42SC around. Fasten off and weave in tail.

Skirt
Use the color Light Green.

At row 26 of Tinkerbell her body you worked in the back loops only. Rejoin your yarn now in the front loops.
1: 42SC. [42]
2: 42SC. [42]
3: (1SC, 1HDC, 1DC + Picot + 1DC in the next st, 1HDC) 10 times, 1SC, SLST. [62]
Fasten off and weave in tail.

Ears (Make 2)
Use the color Beige.

1: 6SC in a Magic Ring. [6]
Fasten off and leave a long tail for sewing.

Hair
Use the color Yellow.

1: Ch15, insert in second ch from hook, 13SC, 3SC in the next st, work along the other side of the chain now, 12SC, inc. [30]
2: Inc, 12SC, (inc) 3 times, 12SC, (inc) 2 times. [36]
3: 1SC, inc, 12SC, (1SC, inc) 3 times, 12SC, (1SC, inc) 2 times. [42]
4: Ch3, 2DC inc the next st, 1HDC, 16SC, 1HDC, 2DC in the next st, 2TR in the next st, 2DC in the next st, 1HDC, 16SC, 2DC in the next st, 1HDC, 1TR. [48] (the first 3Ch counts as the first TR).
Break the yarn.
5: Skip 5st, rejoin the yarn, 13SC, turn. [13]
6: Dec, 9SC, dec, turn. [11]
7: 7SC, dec, turn. [8] Mark the last 2 remaining stitches from the previous row.
8: Dec, 6SC, turn. [7]
9: Dec, 3SC, dec, turn. [5]
10: Dec, 3SC, turn. [4]
11: (Dec) 2 times, turn. [2]
12: Dec. [1]
Fasten off and leave along tail for sewing.

Go back to the 2 stitches you marked.
1: inc, 1SC, turn. [3] (the 1sc should be at the outside of the hair).
2: Dec, 1SC, turn. [2]
3: Dec. [1]
Fasten off and weave in tail.

Bun
Use the color Yellow.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: 18SC. [18]
|
6: 18SC. [18]
7: (1SC, dec) 6 times. [12]
Fasten off and leave a long tail for sewing. Don’t forget to stuff the bun.

Hairband
Use the color Blue.

Make a chain that can fit around the base of the bun.

Wings (Make 2)
Use the color White. (Optional, use metallic/glitter thread along with the yarn, to create a sparkle effect).
The wings won’t be worked in continues rounds.

1: Ch7, insert in second ch from hook, 5SC, 3SC in the next st, now work along the other side of the chain, 5SC, turn. [13]
2: 4SC, (inc, 1sc) 2 times, inc, 4SC. [16]
3: Ch6, insert in second ch from hook, 5SC, turn. [5]
4: 5SC, turn. [5]
5: Dec, 3SC. [4]
Fasten off and leave a long tail for sewing.

Legs (Make 4)
Use the color Beige for 2 legs and for the other 2 use the color Light Green.

1: 4SC in Magic Ring. [4]
2: 2SC in each st around. [8]
3: 8SC. [8]
|
4: 8SC. [8]
Fasten off and leave a long tail for sewing. 
You don’t have to stuff the legs, but you can if you want.

♥ Assembling

Whenever I start to assemble Amigurumi’s, I use sewing pins first to position all parts. This way you can easily move things around until you are happy and sew it on. I recommend you would do this as well.

First sew on Tinkerbell her legs, the 2 back legs go under her skirt and the beige ones, near her face. Now you now that the top of her body is, position her hair nicely and sew it on, then add the bun and put the hairband around it. Then sew on her ears as well. Last sew on her wings!
From felt make her eyes and eyebrows (Or use yarn to create her eyebrows). Glue those on and let dry.

Tinkerbell is finished! I hope it wasn’t too hard? I don’t think so. I hope you had fun. If you decided to make her, make sure to show me on Twitter or Instagram with the #DelinleaDIY.

Have a wonderful day and I’ll see you next week!

Love
Danielle