Crafting Archieven - Pagina 15 van 44 - Delinlea

♥ Spooky Jar DIY

15 oktober 2020 by Delinlea Leave a Comment

Hey Lovelies! Today I have a cute craft for you to make for Halloween! It’s easy to assemble and make, so you can make a lot or just for a quick last minute deco thing! I made a Spooky Jar for you. Of course you can make it how you want, but this one is to give you a idea of what you could do. Most of the materials that are used can be either found for free in nature or you have them already at your house. I hope you will enjoy this tutorial! Somehow I wanna make a few more, but where to put them all? Haha.

For this DIY you’ll need:
♥ A Clean Jar, check if you can recycle any.
♥ Decoration for in the jar, think of moss, acorns, branches etc.
♥ Glitter (optional).
♥ Few Tissues.
♥ Small Ball. (I used stuffing, but you could also use paper or more tissues).
♥ Sewing Thread and Needle.
♥ Paint and Brushes.
♥ Glue (optional).
♥ Fairy Lights (optional).

♥ Tutorial Spooky Jar

Make sure your jar is clean and dry. If your lid is a color you don’t like, paint it in a color you like and let this dry well.

At the top of the jar, you could add some paint as well, I used a bit of white mixed with some glue. You could leave the glue out though, but I didn’t want the white paint to be too opaque. Dap the paint on, messily around the top. You could do a bit at the bottom as well, but I didn’t do so. Let this dry as well.

Decoration

Now let’s add the decoration in the jar. You could use glue, but I didn’t find it necessary. Add anything you like, but if you have something to cover the bottom of the jar, like moss, add that first. And then add anything you like. At the end, when I was happy with how it looked, I sprinkled a bit of glitter over it. When you add lights, it will give that little extra.

Ghost

Take your little ball and your tissues. It depends on the size of your jar on how big you wanna make it, so just adjust it to what you work with. Place to pieces of the tissues on top of each other, make sure the middle of it lines up but the points aren’t. place your ball in the middle and wrap the tissues around it. Use a bit of thread to keep it together. With some black paint you can add a little face to your ghost.
With a big needle poke some thread through. This way you can hang it from the lid with some tape.

Now if you want you can add some lights to the jar as well, I like it both, with or without. But since it’s spooky season, I prefer to add lights!

I hope you enjoyed this quick tutorial! And that you will make it, if you do, show me on Twitter or Instagram with #DelinleaDIY.

Have a wonderful day and I’ll see you next week.

Love
Danielle

♥ Spidey Amigurumi

8 oktober 2020 by Delinlea Leave a Comment

Hey Lovelies! Do you like spiders?! If not, you might have a problem with today’s pattern, although this Spidey looks very cute! I hope you won’t be spooked. Even though it is spooky month! This spider is very easy and quick to make. The legs take the longest to make, but I guess that’s fine. I hope you will enjoy this pattern!

For this Pattern you’ll need;
♥ Velvet yarn in a Spidery color. (I used extra soft from the Zeeman)
♥ DK yarn in Black. (I used Stylecraft Special DK)
♥ Crochet hook. ( I used a 3mm and a 6mm)
♥ Stuffing.
♥ 4 Safety eyes, 2 11mm and 2 6mm.
♥ Yarn Needle.
♥ Sewing Pins.
♥ Stitch Marker.
♥ Bit of White yarn for accent by the eyes.

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
SC = Single Crochet.
ST = Stitch.
FL = Front Loops.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

♥ Pattern Spidey

This pattern is made with continues rounds, unless stated otherwise. Use a stitch marker to mark your first/last stitch of your row.

Head and Body
Use the Velvet Yarn and the 6mm hook.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: 12SC. [12]
4: 12SC. [12]
5: (2SC, dec) 3 times. [9]
6: FL, 2SC in each st around. [18]
You might wanna add the eyes now, the big ones beside each other, where you started the head and the smaller ones on the outer sides of the big ones. And stuff the head as well.
7: (2SC, inc) 6 times. [24]
8: 24SC. [24]
|
10: 24SC. [24]
11: (2SC, dec) 6 times. [18]
12: 18SC. [18]
13: (1SC, dec) 6 times. [12]
14: 12SC. [12] Stuff the body
15: (2SC, dec) 3 times. [9]
16: (1SC, dec) 3 times. [6]
Fasten off and weave in tail.

Legs (Make 8)
Use the Black DK yarn and the 3mm hook.

1: 6SC in a Magic Ring. [6]
2: 6SC. [6]
Repeat row 2 until you have 8 rows total!
Faste off and leave a long tail for sewing.

♥ Assembling Spidey

Whenever I assemble Amigurumi’s, I always like to use sewing pins first, this way I can move parts around until I am happy, then I’ll sew them on.

For this one there isn’t too much sewing. You just have to sew Spidey his legs on. And that’s it.
If you like, you can stitch on a bit of white around his eyes, I found they didn’t show too well without on this yarn. And this makes him even cuter!

I hope you had fun with this Spidey pattern today, and if you did, I would love to see what you made! You can show me on Twitter or Instagram with #DelinleaDIY!

Have a wonderful day and I’ll see you next week with another spooky craft!

Love
Danielle

♥ Halloween Amigurumi’s

1 oktober 2020 by Delinlea Leave a Comment

Hey Lovelies! The spooky month started! Yay! I love it, although we don’t really celebrate it here in the Netherlands. Over the years I have made quite some amigurumi’s that are Halloween related, so I want to list them down in today’s blog. Maybe some you’ve missed or forgot about. So, let’s refresh our memory!

♥ Bat

This bad isn’t scary at all, but who said that all Halloween related stuff had to be scary?! It’s fun to change things up. I think it will look cute to hang a bunch in the air at a party, maybe if someone walks into them, they might get scared anyway if they didn’t expect them!

♥ Bunny Pumpkin

What’s Halloween without Pumpkins?! I just can’t imagine that. I love to decorate, craft and also cook with them. They are multifunctional! I think this year I need to buy a good pumpkin to carve it out. Not sure what yet tho. I will figure that out later. For now enjoy this Amigurumi pattern, at least you don’t have to watch it if it gets moldy xD.

♥ Cat Ghost

How cute is this cat ghost?! I’ve made 3 in go last year, oops xD. And I actually feel like making more.. I guess I will. They are just so easy to make!

♥ Ghost

This little ghost is using the most basic and well know crochet technique, granny square! I sometimes like to play around with stitches like this. That’s how this pattern came alive as well. I usually just have too many ideas.

♥ Hiding Witches

Yes, shy witches exist as well! Didn’t know that right?! These love to hide under their hat and are really friendly, they actually just wanna help you but don’t know how to do that. Maybe we should give them a little hand! These you can make in all sorts of colors, and let them sit anywhere. I think it’s fun decoration around this time of year!

♥ Jack Skellington

I think I should add Jack here as well. I really should watch the movie again since I forgot a bit where it was about. But the Nightmare Before Christmas just shouldn’t be left out here!

♥ Pumpkin Ghost

This one is also made using the Ghost pattern, same series. Just added a Pumpkin instead of a round head. It already gives such a different vibe! I love this one the most, I think, out of this series. Probably because of the pumpkin head that makes it just that little different. I love things that are different!

♥ Witch Ghost

Just like the Ghost pattern, is this one from the same series I made. With a few chances you can make something look completely different. You can make so many variations. You don’t always have to make a completely new pattern.

I hope this post refreshed your mind and that you are able to make some of these patterns you might have forgotten. These are all fun to make, and pretty easy as well! If you made some of those patterns, I hope you will show me on Twitter or Instagram with the #DelinleaDIY. I always love to see what you created using my patterns.

Have a wonderful day and I’ll see you next week!

Love
Danielle

♥ Buzz Lightyear TsumTsum Amigurumi

24 september 2020 by Delinlea Leave a Comment

Hey Lovelies! I’m a bit late with today’s post. Well simply because I got distracted by Thai Drama’s xD. Do you like to watch drama’s? And which do you like? Anyway, I tried to crochet while trying to read the subtitles as well, that went very~~ slow xD.
As you might know today it’s time for a Tsum Tsum, I hope you are ready and a lover of Toy Story! It’s Buzz Lightyear!! Let’s go to the pattern.

For this Pattern you’ll need;
♥ Yarn in the colors Beige, Purple, Green, White, Black and Red. (I used Stylecraft Special DK)
♥ Crochet hook. ( I used a 3mm)
♥ Stuffing.
♥ Black, and Brown Felt for facial details.
♥ Yarn Needle.
♥ Sewing Pins.
♥ Stitch Marker.
♥ (Fabric) Glue.

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
FSC = Foundation Single Crochet.
SC = Single Crochet.
ST = Stitch.
BL = Back Loops.
FL = Front Loops.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

♥ Pattern Buzz Lightyear Tsum Tsum.

This pattern is made with continues rounds, unless stated otherwise. Use a stitch marker to mark your first/last stitch of your row.

Body
Start with the color Beige.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: (3SC, inc) 6 times. [30]
6: (4SC, inc) 6 times. [36]
7: (5SC, inc) 6 times. [42]
8: 42SC. [42]
|
13: 42SC. [42]
Change to the color White.
14: BL 42SC. [42] Mark the first FL of this row!
15: 42SC. [42]
|
23: 42SC. [42]
Change to the color Black.
24: 42SC. [42]
25: 42SC. [42]
Change to the color White.
26: 42SC. [42]
27: 42SC. [42]
Change to the color Green.
28: 42SC. [42]
Change to the color White.
29: 42SC. [42]
30: (5SC, dec) 6 times. [36]
31: (4SC, dec) 6 times. [30]
32: (3SC, dec) 6 times. [24]
33: (2SC, dec) 6 times. [18] Stuff the body.
34: (1SC, dec) 6 times. [12]
35: Dec around. [6]
Fasten off and weave in tail.

Purple Head Cover
At row 14 of the body you worked in BL, now rejoin your purple yarn in the front loops, in the stitch you marked. I kept the butt towards me and worked on it that way.

1: 42SC. [42]
2: 42SC. [42]
Break the yarn and fasten off. Now, skip 9st from where you stopped and rejoin your yarn.
3: 30SC, turn. [30] The remaining stitches you leave untouched.
4: Dec, 5HDC, 1SC, SlSt, 1SC and mark this st with a stitch marker, 9SC, 1SC and mark this st with a stitch marker as well, SlSt, 1SC, 5HDC, Dec.
Break the yarn and fasten off. Now, go to the stitches your marked in the previous row. Join your yarn in either one of them.
5: Dec, 9SC, dec, turn. [11]
6: Dec SC, 7HDC, dec SC. [9]
Fasten off and weave in tail and other tails that might be there.

Ear Covers (Make 2)
Use the color Purple.

5SC in a Magic Ring, SlSt in the first st.
Fasten off and leave a long tail for sewing

Green Band around his Body
Use the color Green.

1: 43FSC, make round with a SlSt in the first st. [43] (you could also Ch44, insert in second ch from hook, 43SC).
2: Ch1, 43SC, SlSt in the first st. [43]
|
4: Ch1, 43SC, SlSt in the first st. [43]
Fasten off and leave a long tail for sewing.

Legs (Make 4)
Make 2 in the color White, and 2 in the color Purple.

1: 4SC in a Magic Ring. [4]
2: 2SC in each st around. [8]
3: 8SC. [8]
|
5: 8SC. [8]
Fasten off and leave a long tail for sewing.

Middle of the Wings
Use the color White.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: BL 12SC. [12]
Fasten off and leave a long tail for sewing.

Wings (Make 2)
Start with the color Purple.
This part won’t be worked in continues rounds.

1: Ch7, insert in second ch from hook, 6SC, turn. [6]
2: Ch1, 6SC, turn [6]
The next row you will alternate white and red yarn for every SC.
3: Ch1, 6SC. [6]
Fasten off and weave in tails.

Tip of the Wings (Make 2)
Use the color Green.

1: 6SC in a Magic Ring. [6]
2: (1SC, inc) 3 times. [9]
3: 9SC. [9]
Fasten off and leave a long tail for sewing.

♥ Assembling

Whenever I assemble Amigurumi’s, I always use sewing pins first. This way you can move parts around until you are happy, then sew it on.

First, put the green band around his body, right after the purple part, sew this on. The add his legs, White in front, Purple at the back.
The ear cover go on both sides of his face, on the purple part. I always like to use references to check where everything goes.
Last, let’s assemble his wings. The Green tips of the wings, slide those over the wing part and sew those on, keep in mind that the white and red part for both are facing forward when the green tips are on the outsides. So those will be mirrored when assembled. Then sew the middle part of the wings to the body, it will be partly on green and partly on white. Now the tip/wing combination you will sew to the middle part.
Make his face, I use yarn for his nose, and felt for the eyes, eyebrows and Chin.

That was it for today, some parts might feel a bit confusing, but if you have no clue how to do it, let me know and I’ll try to help you out! If you made Buzz Lightyear, show me on Twitter or Instagram with #DelinleaDIY I’d love to see what you created!

Have a wonderful day and I’ll see you next week!

Love
Danielle

♥ Mrs. Potts Ufufy Amigurumi

17 september 2020 by Delinlea 2 Comments

Hey Lovelies! Are you ready for a new Ufufy Pattern? You know I made Chip Mug before, right? Well today it’s Mrs. Potts turn. Those don’t really look like an egg, as all ufufy’s do, but they are still really adorable! I tried to keep them the same size, so they fit in our collection!

For this Pattern you’ll need;
♥ Yarn in the colors White, Pink and Yellow. (I used Zeeman Supersoft)
♥ Crochet hook. ( I used a 2mm)
♥ Stuffing.
♥ Black Felt and Thread for facial details.
♥ Yarn Needle.
♥ Sewing Pins.
♥ Stitch Marker.
♥ (Fabric) Glue.

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
SC = Single Crochet.
ST = Stitch.
BL = Back Loops.
FL = Front Loops.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

♥ Pattern Mrs. Potts Ufufy

This pattern is made with continues rounds, unless stated otherwise. Use a stitch marker to mark your first/last stitch of your row.

Body
Start with the color White.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: (3SC, inc) 6 times. [30]
6: (4SC, inc) 6 times. [36]
7: 36SC. [36]
|
14: 36SC. [36]
15: (4SC, dec) 6 times. [30]
16: (3SC, dec) 6 times. [24]
17: BL, (2SC, dec) 6 times. [18]
18: (1SC, dec) 6 times. [12] Stuff the body.
19: dec all around. [6]
Fasten off and weave in tail.

Foot of the Pot
Start with the color Pink.

At row 17 of the body you worked in BL, now rejoin with Pink yarn in the FL.
1: 24SC. [24]
2: (3SC, inc) 6 times. [30]
Change to the color Yellow.
3: BL, 30SC. [30]
Fasten off and weave in tail

Nose
Use the color White.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: 12SC. [12]
4: 3SC, (dec) 3 times, 3SC. [9]
5: 9SC. [9]
6: (2SC, inc) 3 times. [12]
7: 12SC. [12]
|
10: 12SC. [12] Stuff lightly.
11: (2SC, dec) 3 times. [9]
12: (1SC, dec) 3 times. [6]
Fasten off and leave a long tail for sewing.

Lid
Use the color Pink.

1: 4SC in a Magic Ring. [4]
2: 2SC in each st around. [8]
3: 8SC. [8]
4: Dec around. [4]
5: (1SC, inc) 2 times. [6]
6: 2SC in each st around. [12]
7: (1SC, inc) 6 times. [18]
8: (2Sc, inc) 6 times. [24]
9: 24SC. [24]
10: 24SC. [24]
11: BL 24SC. [24]
12: (2SC, dec) 6 times. [18]
Fasten off and leave a long tail for sewing.
If you want, you can stuff the lid lightly, but don’t put in their too much. You’ll get too much space between the body and the lid if you put too much stuffing.
Around the tip of the lid you have an Yellow accent, make a small chain that fits around there and sew it on.

Ruffles
Start with the color Pink.

At row 11 of the lid you worked in BL, rejoin with pink yarn in the FL.
1: 4SC in each st around. [96]
Change to the color Yellow.
2: 96SC. [96]
Fasten off and weave in tail.

Handle
Use the color Yellow.

1: 6SC in a Magic Ring. [6]
2: 6SC. [6]
Repeat row 2 until you have 15 rows.
Fasten off and leave a long tail for sewing.

Assembling

Whenever I assemble a Amigurumi, I’d like to use sewing pins first. This way you can move parts around easily until you are happy. Then sew it on.

First sew the lid to the body of Mrs. Potts, try to center it on top. Then sew on the nose, flatten the bottom lightly to do so. Last sew on the handle. But before you do, the side where you started with the magic ring will be curled. As you can see in the picture, I’ve sewn this, so it stays in place. After this you can sew it to the body.
Last make eyes from felt and use thread to make the eyelashes and eyebrows. With a bit of pink on the cheeks, finishes off this cute Mrs. Potts.

I hope you had fun making Mrs. Potts ! It looks maybe harder to make as it actually is. If you made on for your own, show me on Instagram or Twitter with the #DelinleaDIY, I’d love to see!

Have a wonderful day and I’ll see you next week!

Love
Danielle