Amigurumi Archieven - Pagina 13 van 29 - Delinlea

♥ Squirt TsumTsum Amigurumi

30 juli 2020 by Delinlea Leave a Comment

Hey Lovelies! I was looking for inspiration for TsumTsum’s, since there are so many out there! Of some I didn’t even knew they exist. Just like this one, Squirt! Do you know him? He’s from Finding Nemo. He’s so cute, I just needed to make him. So, here’s the pattern for him!

For this pattern you’ll need:
♥ Yarn in Light Green, Brown, Yellow and Red. (I used Zeeman Supersoft and Budgetyarn.com)
♥ Black and White Felt for the eyes.
♥ Bit of sewing thread in green and Black for Mouth and Eyebrows.
♥ Crochet Hook. (I used a 2mm hook)
♥ Stuffing.
♥ Stitch Markers.
♥ Yarn Needle.
♥ Sewing Pins.
♥ (Fabric)Glue.
♥ Brown Acrylic Paint. (optional, you can make his spots otherwise as well, like with felt or yarn)

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
SC = Single Crochet.
HDC = Half Double Crochet.
DC = Double Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

♥ Pattern Squirt

This pattern is made with continues rounds, unless stated otherwise. Use a stitch marker to mark your first/last stitch of your row.

Body
Use the color Light Green.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: (3SC, inc) 6 times. [30]
6: (4SC, inc) 3 times, (inc, 4SC) 3 times. [36]
7: (5SC, inc) 3 times, (inc, 5SC) 3 times. [42]
8: 42SC. [42]
|
29: 42SC. [42]
30: (5SC, dec) 6 times. [36]
31: (4SC, dec) 6 times. [30]
32: (3SC, dec) 6 times. [24]
33: (2SC, dec) 6 times. [18]
34: (1SC, dec) 6 times. [12]
35: dec around. [6]
Fasten off and weave in tail.

Flippers (Make 4)
Use the color Light Green.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: 7SC, 1HDC, (2DC in the next st) 2 times, 1HDC, 7SC. [20]
5: 4SC, skip 12st, 4SC. [8]
6: 8SC. [8]
Fasten off and leave a long tail for sewing.

Shell (Make 5)
Start with the color yellow
This part won’t be made with continues rounds, close every row with a SlSt and start with a Ch.

1: 5SC in a Magic Ring, SlSt in the first st. [5]
Change to the color Red.
2: Ch1, 2SC in each st around, SlSt in the first st. [10]
3: Ch1, (3SC in the next st, Ch1, Skip 1st) 5 times, SlSt in the first st. [20]
Change to the color Brown.
4: (3SC, 1SC in the st you skipped at row3) 5 times, SlSt in the first st. [20]
5: (3SC, inc) 5 times, SlSt in the first st. [25]
6: (4SC, inc) 5 times, SlSt in the first st. [30]
Fasten off and leave a long tail for sewing.

Obviously you are not finished with the shell yet, sew all the parts together as shown in the drawing below. When you have done that, Now you have to crochet around the edge with SC, but in the spots 2parts of the shell meet, you have to make a HDC. Also you have to make some DC where his ‘neck’ will be. Use the same drawing below to see what goes where.

♥ Assembling

Whenever I start sewing a Amigurumi together, I like to use sewing pins to position all parts first. This way I can move it easily around until I am happy with how it looks. After I will sew it on.

Easiest is to sew on his shell first. This way you know exactly where the flippers will go. The front flippers slightly in front of his shell and his back flippers where 2 parts of his shell meet. You can definitely do however you love it best, though. Then cut some eyes out of felt and glue those on. After I painted on the spots on his head with acrylic paint. (If you heat set the paint you can wash it as well). Last I made his mouth and eyebrows with some embroidery and he was already finished.

It took me forever to finish Squirt though, I have no clue why, probably procrastinating problems haha xD. But I love him now and I am glad Squirt is born. Another Tsum for my growing TsumTsum collection. xD. I hope you will make him as well and if you do, please show me on Twitter or Instagram with the #DelinleaDIY

I hope you had fun with this pattern today and I’ll see you next week.

Love
Danielle

♥ Eeyore Ufufy Amigurumi

23 juli 2020 by Delinlea Leave a Comment

Hey Lovelies! How are you doing?! I hope you are well. I am like hyped up and I don’t know why, I wanna finish and do a lot of stuff today. Some days are like that I guess. Let’s see how much I can finish/do today. First, let’s finish this blog for you, nicely, before I go on to the next thing. It’s ufufy time today and I love today’s subject. Eeyore! Do you love him too? Let’s go to the pattern~.

For this Pattern you’ll need:
♥ Yarn in Light Blue, Light Purple, Beige and Pink. (I used Zeeman Supersoft and Budgetyarn.com)
♥ Brown Fluffy Yarn. (You don’t need much)
♥ Black Felt and Yarn for the details on his body and face.
♥ Crochet Hook. (I used a 2mm hook)
♥ Stuffing.
♥ Stitch Markers.
♥ Yarn Needle.
♥ Sewing Pins.
♥ (Fabric)Glue. (In case you decided to go with felt).

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
SC = Single Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

♥ Pattern Eeyore

This pattern is made with continues rounds, unless stated otherwise. Use a stitch marker to mark your first/last stitch of your row.

Body
Start with the color Light Blue.

1: 6SC in a Magic Ring. [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
5: 24SC. [24]
6: 24SC. [24]
7: (3SC, inc) 6 times. [30]
8: 30SC. [30]
|
11: 30SC. [30]
From here on you will alternate colors to create the belly.
12: Light Blue; 13SC, Light Purple; 9SC, Light Blue; 8SC. [30]
|
14: Light Blue; 13SC, Light Purple; 9SC, Light Blue; 8SC. [30]
15: Light Blue; 12SC, inc, Light Purple; dec, 5SC, dec, Light Blue; inc, 7SC. [30]
16: Light Blue; 13SC, inc, Light Purple; dec, 3SC, dec, Light Blue; inc, 8SC. [30]
Continue with Light Blue only.
17: 30SC. [30]
18: (3SC, dec) 6 times. [24]
19: (2SC, dec) 6 times. [18] Stuff the body nicely.
20: (1SC, dec) 6 times. [12]
21: (dec) 6 times. [6]
Fasten off and weave in tail.

Legs (Make 4)
To make the legs, you want them to be half Light Purple and half Light Blue. This can be a bit tricky to do on a small leg. You can also choose to make them fully Light Blue.

1: In a Magic Ring, crochet 3SC Light Blue, change to Light Purple and crochet 3SC. [6]
2: Light Blue; 3SC, Light Purple, 3SC. [6]
Fasten off and leave a long tail for sewing.

Ears (Make 2)
Start with the color Light Blue.

1: 6SC in a Magic Ring. [6]
2: Light Blue; (inc) 3 times, Pink; (inc) 3 times. [12]
3: Light Blue; 6SC, Pink 6SC. [12]
|
7: Light Blue; 6SC, Pink 6SC. [12]
8: 6SC. [6] (You stop half way the row, you could make a SlSt in the next st if you prefer)
Fasten off and leave a long tail for sewing.
For the pink part I folded it in half to the inside and sewn it together, so the ear gets a bit more shape.

Snout
Use the color Beige.
This part will be a half circle shape. So the first 2 rows are continues and the last you turn your work.

1: 6SC in a magic Ring. [6]
2: Ch2, HDC in the first st, (SC inc) 2 times, HDC + DC in the next st, turn. [8]
3: Ch1, inc, 6SC, inc. [10] (this row is all SC)
Fasten off and leave a long tail for sewing.

Tail
Use the color Light Blue.

Chain5, insert in second ch from hook, 4SC. [4]
Fasten off and leave a long tail for sewing.

Bow
Use the color Pink.

In a Magic Ring; (1SC, 1HDC, 2DC, 1HDC, 1SC) 2 times. [12]
Fasten off and wrap the tail a few times around the bow tightly, where the SC’s are. If you like how it looks, fasten off and leave the rest of the tail there for sewing.

♥ Assembling

Whenever I assemble Amigurumi’s I use sewing pins first to position all parts, this way I can easily move them around until I am happy with the result, then I will sew them on. I recommend you do it this way as well.

Position Eeyore his snout just above his belly, make sure to center it. Then sew it on, and when it was almost completely sewn on, I put a bit of stuffing under it. Just to give it a little bit more shape.
Then is time for his legs, make sure to face all the purple parts of the legs, towards his belly. Sew them on.
Position the ears, since I’ve sewn the pink part together already, I pulled the blue a bit more over it so it’s easier to sew on.
For his tail, sew it to his back. With some black yarn you can make the ‘nail’ if you like. On the tip of the tail add some brown fluffy yarn and stitch his bow on as well.
With some more brown fluffy yarn, make Eeyore his hair, I just went a few time back and forth on his head, until I thought he had enough hair.
Last but not least, create all his details, like his stitchmarks on his body, eyes, nose, etc.

And that was it, I hope you liked making Eeyore! I love him. If you made him as well, don’t forget to show me on Twitter or Instagram with the #DelinleaDIY.

Have a wonderful day and I’ll see you next week.

Love
Danielle

♥ Floral Dolphin Amigurumi

16 juli 2020 by Delinlea Leave a Comment

Hey Lovelies! I always struggle making things with a Summer theme. Maybe because I dislike Summer, but when I started to write down things that are Summery, there are quite some things I love. Like, all those beautiful flowers and plants, Dolphins, etc. So, I tried to combine flowers with a dolphin, a Floral Dolphin. Well, I sorta like how it turned out, but the tail without the bright, flowery, colors I probably like better. But you can be the judge and make your own version with your lovely color choices. Let’s go to the pattern, shall we?

For this Pattern you’ll need:
♥ Yarn in the colors; Blue and Red (I used a mix of DK yarns)
♥ Crochet Hook. (I used a 2,5mm)
♥ Safety Eyes, 9mm.
♥ Stuffing.
♥ Yarn Needle.
♥ Sewing Pins.
♥ Stitch Marker.

♥ Pattern Floral Dolphin

This pattern is made with continues rounds, unless stated otherwise. Use a stitch marker to mark your first/last stitch of your row.

Body
Start with the color Blue.

1: 6SC in a Magic Ring. [6]
2: 6SC. [6]
3: (1SC, inc) 3 times. [9]
4: (inc) 5 times, 4SC. [14]
5: (1SC, inc) 4 times, 6SC. [18]
6: (1SC, inc) 6 times, 6SC. [24]
7: 24SC. [24]
|
11: 24SC. [24]
Add the eyes between row 5-6.
12: (4SC, dec) 3 times, 6SC. [21]
13: (4SC, dec) 3 times, 3SC. [18]
14: 18SC. [18]
15: (1SC, dec) 6 times. [12]
16: 12SC. [12] Stuff the body
17: (2SC, dec) 3 times. [9]
18: 9SC. [9]
19: 9SC. [9]
Now make the end of the tail flat, horizontal, to see if your stitches line up the way the tail should line up with the body. You need to have 5 stitches on the bottom and 4 on top.

Tail Part1
Use the same color as the body or use some colorful, flowery colors.
This with be the bottom part of the tail, made on the 5 stitches, I talked about earlier.
This part won’t be made in continues rounds.

1: 5SC, turn. [5]
2: Inc, 3SC, inc, turn. [7]
3: Inc, 3SC, turn. [5]
4: 4SC, inc, turn. [6]
5: (4SC in the next st) 5 times, SlSt. [21]
As you noticed from row 3 on you don’t use all the stitches on the tail. That’s because the tail is split up in the middle. Repeat row 3 to 5 again from the outer stitch of the tail. (Just like the part you made already, just opposite). The middle stitch of row 2 is used for both sides of the tail, be aware of that.
Fasten off and weave in all the tails that might be there.

Tail Part2
Use the same color as the body or use some colorful, flowery colors.
This with be the upper part of the tail, made on the 4 stitches, I talked about earlier.
This part won’t be made in continues rounds.

1: 4SC, turn. [4]
2: 3SC in the next st, 1SC, turn.
3: 1SC, (4SC in the next st) 3 times. [13]
Same as with part1 of the tail, you need to repeat row 2 and 3 to complete the tail.
Fasten off and weave in any tails.

Fins (Make 3)
Use the color Blue,

1: 4SC in a Magic Ring. [4]
2: (1SC, inc) 2 times. [6]
3: (inc) 2 times, 2SC, (inc) 2 times. [10]
Fasten off and leave a long tail for sewing.

Flower
Use the color Red.

In a Magic Ring, crochet; (Ch2, 2DC, Ch2, 1SC) 5 times.
Pull tight and leave a long tail for sewing. Add a pearl or anything you would like in the middle of the flower.

♥ Assembling

For any amigurumi I’m gonna assemble, I use sewing pins first, This way I can move parts around until I am happy with the outcome, and then sew it on. I would recommend you do so as well!

For this amigurumi there is not much to assemble, just the back and side fins and the flower if you chose to make it. Add all these on where you think it’s cute.

And that was it for this floral dolphin! Obviously I chose this name because of the tail. I hope you enjoyed this cutie! If you decided to make this pattern, I would love to see it, so show me on Twitter or Instagram with #DelinleaDIY.

Have a wonderful day and I’ll see you next week!

Love
Danielle

♥ Pluto V2.0 Ufufy Amigurumi

2 juli 2020 by Delinlea Leave a Comment

Hey Lovelies! Remember that I made this Pluto Ufufy pattern before? Well, forever since, it bothered me that I didn’t make the white of the eyes, part of the body, in the pattern. I simply just used felt. It’s okay if you like that style, but I really had to make this version too. I love this one a lot more, it somehow looks more neat to me. Maybe, because this is usually the style I go for in my Amigurumi’s. I hope you’ll like this upgraded version of Pluto!

For this Pattern you’ll need:
♥ Yarn in Yellow, White, Brown and Light Green. (I used Stylecraft Special DK)
♥ Brown Felt or Yarn for the nose and eyes.
♥ Crochet Hook, 2,5mm.
♥ Stuffing.
♥ Stitch Markers.
♥ Yarn Needle.
♥ Sewing Pins.
♥ (Fabric)Glue. (In case you decided to go with felt).

♥ Pattern Pluto V2.0

This pattern is made using continuous rounds, unless stated otherwise.

Body
Start with the color Yellow.

1: 6SC in Magic Ring. [6]
2: 2SC in each st around. [12]
3: (1SC, inc) 6 times. [18]
4: (2SC, inc) 6 times. [24]
From here you will make color changes to create the eyes.
5: Yellow; 11SC, White; 2SC, Yellow; 2SC, White; 2SC, Yellow; 7SC. [24]
6: Yellow; (3SC, inc) 2 times, 3SC, (White; inc, 2SC, Yellow; 1SC) 2 times, Yellow; inc, 3SC, inc. [30]
7: Yellow; 13SC, White; 9SC, Yellow; 8SC. [30]
8: Yellow; 13SC, White; 9SC, Yellow; 8SC. [30]
9: Yellow; 12SC, inc, White; dec, 5SC, dec, Yellow; inc, 7SC. [30]
Continue with Yellow only.
10: 30SC.[40]
|
17: 30SC. [30]
18: (3SC, dec) 6 times. [24]
19: (2SC, dec) 6 times. [18] Stuff the body
20: (1SC, dec) 6 times. [12]
21: (Dec) 6 times. [6]
Fasten off and weave in tail.

Snout
Use the color Yellow.

Make 5 CH.
1: Insert in second chain from hook, 3SC, 3SC in the last st, 2SC, inc. [10]
2: inc, 2SC, (inc) 3 times, 2SC, (inc) 2 times. [16]
3: 16SC. [16]
Fasten off and leave a long tail for sewing. You will have to stuff the snout, but that’s easier when it’s about half way sewn to the body.

Ears (make 2)
Use the color brown.

1: 6SC in magic ring. [6]
2: (1SC, inc) 3 times. [9]
3: 9SC. [9]
|
9: 9SC. [9]
10: (1SC, dec) 3 times. [6]
11: 6SC. [6]
Fasten off and leave a long tail for sewing. Stuffing is not needed.

Collar
Use the color Light Green.

Chain about 30. Just measure if you need more or less.
Make round, fasten off and weave in tails.

Legs (Make 4)
Use the color Yellow.

1: 6SC in a magic Ring. [6]
2: 6SC. [6]
Fasten off and leave a long tail for sewing.

♥ Assembling

I always use sewing pins to place all parts first, before sewing. This way you can easily move all parts around until you are happy with the outcome.

First position his snout under the white eye shape you already made in the body. Now you know where all the other parts go as well. Like his legs and ears. Position those nicely and sew them on as well. Then put his collar on, you don’t have to sew this one on, but if you prefer you can!
Oh and don’t forget to give him a tail! I just took some brown yarn and attached it to his body. Last create his facial features, like his nose and eyes. You can either make those out of felt, like I did, and glue them on, or use embroidery if you like.

And Pluto V2.0 is done! Not to hard right? I hope you enjoyed this pattern, and if you did, make sure to show me on Instagram or Twitter with the #DelinleaDIY!

Have a Wonderful day and I’ll see you next week!

Love
Danielle

♥ Tigger Tsum Tsum Amigurumi

25 juni 2020 by Delinlea Leave a Comment

Hey Lovelies! Do you remember Christmas Countdown 2017?! Damn, it sounds ages ago! But I remember it very well, and my theme was Tsum Tsum’s that year. I also made Tigger in his cute little elf costume, which can be found here. Now, I realized that I never made a regular version for a Tigger Tsum. So, I thought it was time to make a pattern for him, I first thought I wanted to use parts of the Christmas version, but I ended up with a completely new pattern, oops xD.

For this Pattern you’ll need:
♥ Yarn in the Orange, Brown, Light Yellow and Pink. (I used some random DK yarn)
♥ Crochet Hook. (I used a 2,5mm hook)
♥ Stitch Markers.
♥ Sewing Pins
♥ Stuffing.
♥ Yarn Needle.
♥ Felt in the color Dark Brown.
♥ Scissors.
♥ (Fabric) Glue.

Stitches used (US Terms):
Magic Ring.
CH = Chain.
SLST = Slip Stitch.
SC = Single Crochet.
HDC = Half Double Crochet.
ST = Stitch.
Inc = Increase.
Dec = Decrease.
(…) = Repeat the space in brackets the given number of times.
[…] = Total number of stitches.

♥ Pattern Tigger

This pattern is made using continuous rounds, unless stated otherwise.

Body
Start with the color Orange.

1: 6SC in a Magic Ring. [6]
From here on you will change colors every now and then to create his eye area.
2: Orange; 1SC, Light Yellow; 1SC in the same st as the last SC, inc, 1SC, Orange; 1SC in the same st as the last SC, (inc) 2 times. [12]
3: Orange; 1SC, Light Yellow; inc, (1SC, inc) 2 times, Orange; (1SC, inc) 3 times. [18]
4: Orange; 2SC, Light Yellow; inc, (2SC, inc) 2 times, Orange; (2SC, inc) 3 times. [24]
5: Orange; 3SC, Light Yellow; inc, (3SC, inc) 2 times, Orange; (3SC, inc) 3 times. [30]
6: Orange; 4SC, Light Yellow; inc, (4SC, inc) 2 times, Orange; (4SC, inc) 3 times. [36]
7: Orange; 5SC, Light Yellow; inc, (5SC, inc) 2 times, Orange; (5SC, inc) 3 times. [42]
8: 42SC. [42]
|
12: 42SC. [42]
From here on you will create his stripes, read well to see where they go.
13: Orange; 8SC, Brown; 1SC, 13HDC, 1SC, Orange; 20SC. [42]
14: Orange; 9SC, 13SlSt, 21SC. [42]
15: Orange; 42SC. [42]
16: Orange; 42SC. [42]
17: Orange; 28SC, Brown; 1SC, 13HDC. [42]
18: Brown; 1HDC, 1SC, Orange; 27SC, 13SlSt. [42]
19: Orange; 1SlSt, 11SC, Brown; 1SC, 7HDC, 1SC, Orange; 21SC. [42]
20: Orange; 13SC, 7SlSt, 22SC. [42]
21: Orange; 42SC. [42]
22: Orange; 28SC, Brown; 1SC, 13HDC. [42]
23: Brown; 1HDC, 1SC, Orange; 10SC, Brown; 1SC, 9HDC, 1SC, Orange; 6SC, 13SlSt. [42]
24: Orange; 1SlSt, 12SC, 9SlSt, 20SC. [42]
25: Orange; 42SC. [42]
26: Orange; 42SC. [42]
27: Orange; 14SC, Brown; 1SC, 7HDC, 1SC, Orange; 19SC. [42]
28: Orange; 15SC. 7SlSt, 20SC. [42]
Continue the rest of the body with Orange.
29: 42SC. [42]
30: (5SC, dec) 6 times. [36]
31: (4SC, dec) 6 times. [30]
32: (3SC, dec) 6 times. [24] Start stuffing the body
33: (2SC, dec) 6 times. [18]
34: (1SC, dec) 6 times. [12] Add more stuffing if you feel Tigger needs it.
35: (dec) 6 times. [6]
Fasten off and weave in tail.

Snout
Use the color Light Yellow.

1: 8SC in a Magiv Ring. [8]
2: 2SC in each st around. [16]
3: 1SC, inc, 1HDC, 2HDC in the next st, 1HDC, (2SC in the next st, 1SC) 2 times, 1HDC, 2HDC in the next st, 1HDC, 2SC in the next st, 1SC, inc. [24]
4: 24SC. [24]
5: 24SC. [24]
Fasten off and leave a long tail for sewing. The snout you will stuff while you sew it on later.

Nose
Use the color Pink.

1: 6SC in a Magic Ring. [6]
2: 3SC in the next st, 2SC, 3SC in the next st, 2SC. [10]
Fasten off and leave a long tail for sewing.

Ears (Make2)
Use the color Orange.

1: Ch5, insert in second ch from hook, 3SC, 3SC in the next st, now work along the other side of the chain, 2SC, inc. [10]
2: 3SC, (inc) 3 times, 4SC. [13]
3: 4SC, (dec) 3 times, 3SC. [10]
4: 10SC.
5: (Dec, 3SC) 2 times. [8]
Fasten off and leave a long tail for sewing.

Inner Ear (Make2)
Use the color Light Yellow.
This one you won’t work in continues rounds.

1: Ch4, insert in second ch from hook, 3SC, turn. [3]
2: 3SC, turn. [3]
3: 2SC, inc. [4]
Fasten off and leave a long tail for sewing. Sew those inner ears to the base of the ear.

Legs (Make4)
Use the color Orange.

1: 4SC in a Magic Ring. [4]
2: 2SC in each st around. [8]
3: 8SC. [8]
4: 8SC. [8]
5: 8SC. [8]
Fasten off and leave a long tail for sewing.

Tail
Start with Brown.
This one you won’t work in continues rounds.

1: 6SC in magic ring, SlSt in the first st. [6]
2: Chain 1, 6SC, SlSt in the first st. [6]
Change to Orange.
3: Chain 1, 6SC, SlSt in the first st. [6]
Change to Brown.
4: Chain 1, 6SC, SlSt in the first st. [6]
Repeat row 3 and 4 until you have 9 rows total.
Fasten off and leave long tail for sewing.

♥ Assembling

Whenever I start to assemble a Amigurumi plush, I use sewing pins to put it together first. This way I can move all parts around until I am happy and sew them on.

Position his snout just under the middle of the face, and sew it on, and while you do so, make sure to stuff it. Now the snout is on you can also sew on his nose.
Sew his legs on and place his ears. If you haven’t yet, make sure to sew on the inner ears to the base of the ears before attaching it to the body.
Don’t forget to put his tail on!
Last there are some feature you have to stitch on or use felt for it. Like his eyebrows, stripes and eyes. Just don’t forget any details!

And Tigger is done! You made it! Haha I hope you loved this pattern. Whenever I think of Tigger I always instantly think of Bang Yongguk as well, he’s such a huge Tigger lover. Anyway, I hope you had fun and don’t forget to show me your on Twitter or Instagram with the #DelinleaDIY.

Have a wonderful dat and I’ll see you next week.

Love
Danielle